Okay, here the deal. I have a set of OCZ Platinum EL Rev.2 PC3200 that I got to 250mhz ( 500mhz effective ) with 2-2-2-5 timings and 3.1v on an NF2 based mobo months back and I can't get the crap to run it's rated SPD timings at PC3200 speeds ( or PC3200 speeds at all for that matter ) on my freaking A8N32-Sli.
Given the results of this ram on an NF7-S I know this is one of the batches that should break 300mhz ( 600mhz effective ) with 2.5-4-4-8 2T timings and 2.85v but I am gonna need some info on how to get it running at least it's rated speed.
I am highly unfamilliar with all the extra timings and crap on the A64 boards and I've only been messing with the 4 I know from Oc'n on a NF2 chipset and I'm having no luck at all.
And before anyone asks all the hardware on the PC is well above what would be needed for heavy OC'n so please don't be asking me for every in and out of the system as I just don't feel like posting everything atm.
I've updated the bios on the board and all for those wondering.
Any help in getting my ram to run it's rated 200x2 @ 2-2-2-5 1T up to 250mhz 2-2-2-5 2T would be greatly appreciated as I assume there are quite a few people using the same board and ram as me and I know this ram will take the voltage/speed.
Oh, this is the 2x512mb kit that uses the latest and greatest TCCD Revision "F" modules that AT named the fastest DDR of all reaching speeds in excess of 636mhz effective with very very very good timings and enough voltage : )
Given the results of this ram on an NF7-S I know this is one of the batches that should break 300mhz ( 600mhz effective ) with 2.5-4-4-8 2T timings and 2.85v but I am gonna need some info on how to get it running at least it's rated speed.
I am highly unfamilliar with all the extra timings and crap on the A64 boards and I've only been messing with the 4 I know from Oc'n on a NF2 chipset and I'm having no luck at all.
And before anyone asks all the hardware on the PC is well above what would be needed for heavy OC'n so please don't be asking me for every in and out of the system as I just don't feel like posting everything atm.
I've updated the bios on the board and all for those wondering.
Any help in getting my ram to run it's rated 200x2 @ 2-2-2-5 1T up to 250mhz 2-2-2-5 2T would be greatly appreciated as I assume there are quite a few people using the same board and ram as me and I know this ram will take the voltage/speed.
Oh, this is the 2x512mb kit that uses the latest and greatest TCCD Revision "F" modules that AT named the fastest DDR of all reaching speeds in excess of 636mhz effective with very very very good timings and enough voltage : )
Facebook
Twitter