A8N-SLI not setting my hyperx SPD correctly?

[mrscintilla]

I have 2 512MB Kingston Hyperx Pc3200 bought from outpost.com. It's supposed to be rated at 2-3-2-6-1
But CPU-Z shows that the spd is 2.5-3-3-8 DOes anyone else have similar problems with wrong SPDs under A8N-SLI? Is it my board or did I get bad memory?

 

[DerKaiser]

You can check what the SPD table on your RAM says with CPU-Z.

 

[FastEddie]

No to both. Try setting up your memory manually.

 

[Relion]

As for the 2.5-3-3-8 I tend to think thats what the Asus SLI sets as default for DDR400...I have the same settings..

How you change your memory settings in the asus SLI mobo? I have the 1001 BIOS...do I need to upgrade it? Everything is running fine but I have not found where to change them...

 

[imported_allanon]

also my motherboard read wrong the spd chip... the problem is the bios!!!the bios not have the possibility to set manually the frequency!!Ihave two twins banks of corsair cmx 512 3200cas2 but a8n-sli view one of two like a 2700 memory (cpu-z says the corret brand but read worng the spd!).