A7V133 problems with Tbirs

colonel

Golden Member
Apr 22, 2001
1,779
20
81
I change my 1.2 for a 1.4 Tbird, with a Swiftech with the new, copper
with alumminum with a high fan. Post fine the 1.4 Tbird check the temp
in the Bios for 15 minutes, was in 37c ,save, exit. Post fine, but I reset
again because my second Ide was lose. After this I have no beep, I
went back to 1.2 axia, nothing, no beep, but all the fan and power
supplier are working, Reset cms, many times. Pulled all panel
connector, speaker, etc. same problem. What do you think, Is the
mobo, DEAD.
:confused:
 

Mingon

Diamond Member
Apr 2, 2000
3,012
0
0
Have a look at the trace underneath the ziff socket(nearest mem slot) is it scratched if so board is f**cked.
 

Wind

Diamond Member
Jul 22, 2001
3,034
0
0
Try clearing the CMOS by shorting the 2 solder point near the batt w/ the power plug off the PSU.