A7V133 problems, please help

[colonel]

I change my 1.2 for a 1.4 Tbird, with a Swiftech with the new, copper
with alumminum with a high fan. Post fine the 1.4 Tbird check the temp
in the Bios for 15 minutes, was in 37c ,save, exit. Post fine, but I reset
again because my second Ide was lose. After this I have no beep, I
went back to 1.2 axia, nothing, no beep, but all the fan and power
supplier are working, Reset cms, many times. Pulled all panel
connector, speaker, etc. same problem. What do you think, Is the
mobo, DEAD.

 

[colonel]

thanks for the guys responding to my thread, I got it fixed The problem was my second IDE was half pulled:disgust: because I changed floppy cable for a new round one. I got the Tbirds working now. I was lucky because I cleaning cmos and the cpu fan stopped, I was busy and did not notice the fan. My new Swiftech (the new one with copper ass and alumminum) save the Tbird, I touched the copper and was HOT like my mom frypan. Now th Mobo is working with the 1.4 Tbird , but this guy is kind of shy compare to the AXIA.