Allright, I sat down tonight with my system and used all the clock settings on the A7V133.... I want to note that I'm using the 1003 Bios, and I don't know if they can add further clock settings in the future...
Everyone remember their Bianary???
Well that is basically the method I used...
Switch 1 = 1
Switch 2 = 2
Switch 3 = 4
Switch 4 = 8
Switch 5 = 16
On = 0
Off = 1
The news isn't good sorry guys, but it doesn't look like there are Clock settings above 133Mhz...
In Jumper Free mode, My motherboard, can go up to 150Mhz... at least that is as far as I tested...
I chose a 9x mulitplier, because at 9x150Mhz = 1350, and I've tested my chip that High. I am running a 1.2Ghz Chip... For the settings that did not boot, I backed up the multiplier to 8x, and retried the boot, but none of the settings would boot at either 8x or 9x....
Bianary / FSB Speed / Speed of CPU
0 / 100Mhz / 900Mhz
1 / 103Mhz / 927Mhz
2 / 105Mhz / 945Mhz
3 / 100Mhz / 900Mhz
4 / 90Mhz / 810Mhz
5 / 95Mhz / 855Mhz
6 / 101Mhz / 909Mhz
7 / 102Mhz / 918Mhz
8 / 113Mhz / 1017Mhz
9 / 115Mhz / 1035Mhz
10 / 117Mhz / 1053Mhz
11 / No Boot / No Boot
12 / 107Mhz / 963Mhz
13 / 109Mhz / 981Mhz
14 / 110Mhz / 990Mhz
15 / 110.88Mhz / 998Mhz Wierd One
16 - 26 Were all no boots even at 8x
27 / 133Mhz / 1200Mhz
28 - 31 Were all no boots even at 8x...
I don't know if these can be altered by Bios updates later, but the jumper settings don't seem to offer anything for the overclockers among us...
Everyone remember their Bianary???
Well that is basically the method I used...
Switch 1 = 1
Switch 2 = 2
Switch 3 = 4
Switch 4 = 8
Switch 5 = 16
On = 0
Off = 1
The news isn't good sorry guys, but it doesn't look like there are Clock settings above 133Mhz...
In Jumper Free mode, My motherboard, can go up to 150Mhz... at least that is as far as I tested...
I chose a 9x mulitplier, because at 9x150Mhz = 1350, and I've tested my chip that High. I am running a 1.2Ghz Chip... For the settings that did not boot, I backed up the multiplier to 8x, and retried the boot, but none of the settings would boot at either 8x or 9x....
Bianary / FSB Speed / Speed of CPU
0 / 100Mhz / 900Mhz
1 / 103Mhz / 927Mhz
2 / 105Mhz / 945Mhz
3 / 100Mhz / 900Mhz
4 / 90Mhz / 810Mhz
5 / 95Mhz / 855Mhz
6 / 101Mhz / 909Mhz
7 / 102Mhz / 918Mhz
8 / 113Mhz / 1017Mhz
9 / 115Mhz / 1035Mhz
10 / 117Mhz / 1053Mhz
11 / No Boot / No Boot
12 / 107Mhz / 963Mhz
13 / 109Mhz / 981Mhz
14 / 110Mhz / 990Mhz
15 / 110.88Mhz / 998Mhz Wierd One
16 - 26 Were all no boots even at 8x
27 / 133Mhz / 1200Mhz
28 - 31 Were all no boots even at 8x...
I don't know if these can be altered by Bios updates later, but the jumper settings don't seem to offer anything for the overclockers among us...
Facebook
Twitter