Hi,
I have an ASUS A7N8X deluxe and XP2200+ CPU, with 2x256MB DDR400 KVR400X64C25/256 ram in slots 2 and 3 per manual spec.
It came and runs as standard CPU133x13.5 (1795.5mhz). Sanda reports that my FSB is running at 266mhz. I want to get it to 400mhz which the motherboard and ram support.
Whenever I change the CPU clock speed or the multiplier, the system locks up at boot (system must be full powered off to recover, and it drops back to a very low MHZ on the next startup), even if I go to 200x9.0 (1800mhz).
Can anyone advise what speed setting I should use to get the 400MHZ FSB going and full utilise my ram and FSB.
Thanks!
Holli
I have an ASUS A7N8X deluxe and XP2200+ CPU, with 2x256MB DDR400 KVR400X64C25/256 ram in slots 2 and 3 per manual spec.
It came and runs as standard CPU133x13.5 (1795.5mhz). Sanda reports that my FSB is running at 266mhz. I want to get it to 400mhz which the motherboard and ram support.
Whenever I change the CPU clock speed or the multiplier, the system locks up at boot (system must be full powered off to recover, and it drops back to a very low MHZ on the next startup), even if I go to 200x9.0 (1800mhz).
Can anyone advise what speed setting I should use to get the 400MHZ FSB going and full utilise my ram and FSB.
Thanks!
Holli
