a7m266 settings - dangerous or ok?

[aks93]

I have set vcore to 1.85v, vio 2.9v, v101 3.45v. I am considering
vio 3.56v, are these settings dangerous to the components below?

cpu 1.4Ghz ayhja y trying for 1600+

cpu temp 43c
mb temp 40c
+12v 12.342v
+5v 4.972v
+3.3v 3.36v
vcore 1.872v

Thanks

Specs:
mobo - a7m266 rev 1.04 bios 1.04a
HD - ibm 75gxp 75GB
g/x - Gainward geforce3 with dvi, matrox g400 pci
memory - STEP ThermoDynamics 256 x2 Meg 2.5V PC2400 184-Pin DDR DIMM
power supply -STEP Titanium Series Twin Fan ATX V2.03 Power Supply 605w
cooler - STEP-UP KODIAK 6000 Pure Copper CPU Cooling System For Socket 370 CPU's
SCard - sblive gamer
DVD - pioneer 116
CDRW - plextor 16x10x40
asus ipanel
newq platinum equaliser
monitors - samsung 170T fp, kds 19 avitron crt

 

[Bingo13]

Take your memory down to 2.7v, everything else looks fine, did you start with the defualt settings to see how high you could go first?

 

[aks93]

Bingo - yes I started with default settings, the guy who sold me the pretested cpu told me to take it up to 2.7v, but the 1.4Ghz still wont o/c to the pretested 1600Mhz, even though the case is open!

What's the worst case running at these settings?

Thanks