A64 2800 would it run at 1.2volts?

Jhatfie

Senior member
Jan 20, 2004
749
2
81
I am not sure since my motherboard only has lower adjustments to 1.45v for vcore. I was able to overclock my 3200+ to 2.35ghz at 1.45v though, so I assume it might work at 1.2v if you can find a motherboard that has voltages down that low.
 

iwantanewcomputer

Diamond Member
Apr 4, 2004
5,045
0
0
maybe. if you don't want to use cool and quiet you might be able to get the voltage down that much.
since it's hot here in the summer i run mine at 2GHz at 1.3 volts. with my new ower supply for some reason the voltages are dead on at normal voltages, but it runs it at 1.26 when i set the mobo at 3.0

ive tested it with sandra cpu burn in wisard and it is table at 2 GHz at 1.26 volts. a 2800 would have a better chance to do 1.2 V than a 3000, but i think my chip is pretty lucky
it's a co stepping newcastle

hope this helps
 

Bateluer

Lifer
Jun 23, 2001
27,730
8
0
Makes you wonder why, if AMD chips can run at voltages that low, they ship them at 1.35 to 1.55v stock?
 

iwantanewcomputer

Diamond Member
Apr 4, 2004
5,045
0
0
while i'm at it, i might try underclocking it to 2800 speeds or lower and seeing how low the voltage will go
will post results later on
 

Yanagi

Golden Member
Jun 8, 2004
1,678
0
0
anyone know what voltages the .09 micron chips will have? Provided they dont have the leakage problem the prescott has youd probably be able to have a super quiet PC and still be able to overclock it since it doesnt run hot.
 

iwantanewcomputer

Diamond Member
Apr 4, 2004
5,045
0
0
to answer yanagi, i heard that leakage problems like the prescott are getting worse in 90 nm, even though the voltage is lower. the main reason they aren't out though is that amd can'y make them as fast as the 130 nm chips yet. they can get them stable at 2 ghz easy but can't make more than a few that can do 2.6

results of my voltage testing:
I tried testing mine at 1.20 V at 2 ghz-no go
underclocked to 1.8ghz(2800 speed) it booted up. asus probe measured the voltage at an incredible 1.16 volts, and it passed some benchmarks just fine! the temperature monitor showed the temp of the cpu dropping as soon as i loaded it. when it stableized under load the temp was at 37 for the processor, 39 for the motherboard, with a case temp of 34i haven't played with cool n quiet yet, but this will stay pretty cool in the winter.