A question for those with Socket A processors

[Haervii]

What kind of RAM are you using? (not how much what type and brand name)

 

[Mem]

I`m using PC133 Crucial CAS2 ram one stick at the moment of 128mb,will probably put more in later.

🙂

 

[Enigma]

2 sticks of Kingston PC-100 for a total of 256

 

[HellRaven]

two sticks of pc-100 cas2 running at 133 cas3 right now. One has toshiba chips and the other has infineon.

 

[Sunner]

One 64 MB stick of noname, and one 128 stick of noname, one has hyundai chips on it, cant remeber whats on the other one.
Both are PC-100 C3.

 

[rmblam]

Kingston virtual channel 128MB (kvr vc133/128) which has NEC chips.

SPD sets it to 3,2,2 but I have it running on a 107fsb and set at 143mhz 7ns 2,2,2 in my bios.

Groovy

 

[Gizmology]

One NEC PC133 and one Crucial PC100. Looks like only 1-2 other people actually read your question =-)


-Giz

 

[Muerto]

Two 64 MB sticks of Azen PC100 SDRAM. Buying 128 MB of Micron PC133 SDRAM soon. 🙂

 

[Technonut]

Mosel Vitelic PC133, CAS2.

 

[Dan]

NEC PC-133 CAS 2

 

[formulav8]

64M of PC133 noname

 

[allan120]

Mushkin high perf rev 2...all ram settings on optimal, and it's more stable than it was with 2x128mb noname PC133 on safest settings. Then again, I found out one of those 128's won't even work at 66mhz, so it could have been that screwing me up so badly. 🙂

 

[Haervii]

Well... I see we have a diverse collection of RAM for overclocked Durons/Thunderbirds. It doesn't look like you have to have the greatest to overclock them. Sounds good, because Mushkin and Crucial are a little pricey.

 

[hans007]

i'm using a stick of micron pc100 256mb cas2. Runs at 150mhz cas3 rock solid.

 

[tigger80]

socket a motherboards doesn't seem as picky as the older slot a motherboards. Most memory should do, even generic

 

[Imported]

Mosel Vitalic PC133 CAS2. Had some PNY with Hyundai chips and I could never post CAS2 at PC133.

 

[AMB]

2x Crucial PC133 128Mb CAS 3 @ CAS 2