90NM Athlon Winchester Clocks in from me

willfreund

Senior member
May 25, 2004
290
0
0
3500+ First batch
vcore= 1.5
System temp average 27C.
hyper task/Ldt = 3x
memory fsb= 166x2
60 C Peak 55C average @ 2.4 GHZ
Useing Memory downlclocking And HTT Downclocking.Stable untill 2.55+ GHZ with1.525 Volts
AgP locked
Msi neo2 Nforce3 250GB [*]OCZ powerstream 520

Koolance Exos Full speed ahead.
Im not pushing it any further. Its a hot pancake.
If i had A camera I would show you my box setup basic one at best with sleeves and tied down.The artic silver 5 had a tranfparent glaze. Full pressure on the heatsink.>.I belive this processor is not made of wood ^^ referring to a old post
rose.gif
 

willfreund

Senior member
May 25, 2004
290
0
0
Just a note the Temperatures On a MSI2 have inconsistant temperature probes.IF I can get a hand held I could provide more accurate.Looking on the other posts about the msi2, The temps I have have a tolrance of 12%
 

Elcs

Diamond Member
Apr 27, 2002
6,278
6
81
Looks ok. I think its a testament to AMD to have produced a rather equally performing chip on a smaller process.... even if they cant get their PR's right.
 

Zebo

Elite Member
Jul 29, 2001
39,398
19
81
Screen shot? I don't believe anything you say after that "made of wood" BS.;)

And now you're saying AMD "Its a hot pancake." when the reviewers disagree w/ you about 90nm. Besides you can afford that gear but not a digicam? Come on.
 

willfreund

Senior member
May 25, 2004
290
0
0
*It was probably a wafer,But like one person said wood is a temp insulator "shrug"
Digicam is last
2 ,3Grand for upgrading a computer easy.I had a 3400 clawhammer ATI9800 XT.Thats a antique AT standards

I did a second Test today.
Reseted the waterblock it was off Alot.
333 Ram timings, Agressive 2222227
Vcore 1.6volts
update bio
Temps Peak 45C Average 40C
Got it up to 2.53 Over that doom started corrupting
I didnt test stablity. If it runs a game good and startsup its fine for what im doing ATM