• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

90nm 3200+ 0451

C

chick3nhead

Member
Hey, i got my 9nda3+ and 3200+ in today. Thats the good news, the bad news is the 0451 is known to not be the best overclocker, also my 1gb of ddr333 ram wont post so im borrowing my friends stick of ddr266. Yeah, talk about a bottleneck, I thought I used to have one, now i really have one. But , anyways i managed to put the ram divider at 100 so i can figure out the limit of the cpu. I currently have it booted at 241.0 x 10 =2410 with a core voltage of 1.417, according to cpu-z. Also HTT multiplier is 3x and chipset voltage is 1.6. Should i quit here or add more voltage to see what more it can do, also what is the max voltage that would be smart to run on. Thanks.
 
Ok, well i finally found a place that said they wouldnt run a winchester above 1.6 or 1.65 on air. So i took it up to 251x10=2510 at a vcore of 1.52. Can anyone confirm that this voltage is safe to run at, or does anyone run higher than this on air cooling?
 
That chip has a bit of headroom left to explore. 1.52 is pretty safe. I think I agree with the 1.6 to 1.65 limit for aircooling, my winnie starts to get a little hot with that kind of vcore... not drastically... but enough to know that the chip is being pushed.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top