I have a couple 8RDAs(non +) and one is running fine(bought used in a system), and the other(bought used locally) works with a duron 1.3ghz, but I throw an XP1700/2100 and no boot.
At first I thought it might have been a jumper issue, and sure enough there wasen't a jumper on the FSB pins indication a 100mhz FSB. I put one on thinking it solved, and no go. Duron boots fine, XP's.... nothing.
My system:
8RDA
Radeon VE 32meg AGP
Micron 1x512 PC2700 (tried 2x256 kingston hyper x PC3000 with same results)
WD 80gig SE
Linksys NIC
Vantec fan controller
Lite on 16xDVD
Sony 48x CDRW
Lanboy aluminum case.
I've never flashed a bios, and am not sure which one is running currently. Could this be an issue? I just wanted to check and see if anyone knew of this problem. Thanks! I can check what bios and report back.
At first I thought it might have been a jumper issue, and sure enough there wasen't a jumper on the FSB pins indication a 100mhz FSB. I put one on thinking it solved, and no go. Duron boots fine, XP's.... nothing.
My system:
8RDA
Radeon VE 32meg AGP
Micron 1x512 PC2700 (tried 2x256 kingston hyper x PC3000 with same results)
WD 80gig SE
Linksys NIC
Vantec fan controller
Lite on 16xDVD
Sony 48x CDRW
Lanboy aluminum case.
I've never flashed a bios, and am not sure which one is running currently. Could this be an issue? I just wanted to check and see if anyone knew of this problem. Thanks! I can check what bios and report back.
