8K7A+ Questions

[Tanked]

This board has been working great for me, but two things I haven't been able to figure out:

1) The CPU Voltage defaults to 1.8 volts, which is a .05 volts higher then the standard. The voltage jumpers on the motherboard only increase the voltage. I normally wouldn't mind, but my CPU temperatures are higher then I'd like and lowering the voltage might help.

2) That stinkin' 1/5 PCI Divider. Epox says its there, some websites say its there, but I can't find it.

Thanx for any help.

 

[Tanked]

bump

 

[Technonut]

1) The CPU Voltage defaults to 1.8 volts, which is a .05 volts higher then the standard. The voltage jumpers on the motherboard only increase the voltage. I normally wouldn't mind, but my CPU temperatures are higher then I'd like and lowering the voltage might help.

I had and used the 8K7A+ before...nice mobo. As for the Vcore, that is the way it is .. I suggest a higher CFM fan, or a better heatsink.

2) That stinkin' 1/5 PCI Divider. Epox says its there, some websites say its there, but I can't find it.

The 8K7A+ does not have this feature as far as I know.

 

[Tanked]

Yeah, its a good mobo...was looking forward to using a 166MHz FSB, though