• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

8ihxp hard drive led hdd

S

sheriffA

Junior Member
I can't seem to get the hard drive led to work on my case. The Power LED is working fine but th HDD light is not. Any suggestions or others with the similar problem?

gigabyte 8ihxp and Kingwin KT-436B
 
The HDD Led only works for the 4 standard IDE ports.
It will not light up if your Hard Drives are using the promise ATA133 RAID ports.
This is true of any motherboard w/onboard raid.

However there may be a RAID Led you can usee instead.
 
Originally posted by: sao123
The HDD Led only works for the 4 standard IDE ports.
It will not light up if your Hard Drives are using the promise ATA133 RAID ports.
This is true of any motherboard w/onboard raid.

However there may be a RAID Led you can usee instead.
Click to expand...

This is VERY untrue! My 8IRXP IDE led worked fine with the HD connected to the RAID controller, and it works like a champ hooked to the RAID controller on the 8IHXP! Make sure you select ATA mode in the bios, and change your 1st or 2nd boot device to SCSI. After that, the LED should lite just fine, if you are using the RAID controller. If not, then either the polarity is wrong despite what the tester said, or your LED is burnt out...

 
You must log in or register to reply here.

TRENDING THREADS

Back
Top