Ok so after weeks and weeks of trial and error i finally got my Q9450 stable @ 3.62.
Current settings are as follows.
CPU: 453 x 8
Ram: 1086/ 5,4,4,14
Vcore: 1.384 (load)
VTT:1.3
NB: 1.5
SB: 1.2
Vmem: 2.075
GTLREF 00,00,00,00
I have see people hit 3.8ghz, so im testing out the FSB limit of the board -
set the FSB at 475 (x6) posts into windows, however when running p95 blend one core keeps failing. Raised the NB and still thread 2 fails. Now since this is a thread failure does this mean that the mb cannot handle the FSB or do i have to start tweaking the GTLREF (remember im still at x6 multiplier).
Current settings are as follows.
CPU: 453 x 8
Ram: 1086/ 5,4,4,14
Vcore: 1.384 (load)
VTT:1.3
NB: 1.5
SB: 1.2
Vmem: 2.075
GTLREF 00,00,00,00
I have see people hit 3.8ghz, so im testing out the FSB limit of the board -
set the FSB at 475 (x6) posts into windows, however when running p95 blend one core keeps failing. Raised the NB and still thread 2 fails. Now since this is a thread failure does this mean that the mb cannot handle the FSB or do i have to start tweaking the GTLREF (remember im still at x6 multiplier).
Facebook
Twitter