3DMark2001SE Pro gave "illegal operation" and hangs my PC
Mine's a new system, when I run 3DMark2001SE Pro Benchmark test, it runs
up to Test 6 and "illegal operation occurs" followed by immediate
hanging on my PC, have to reboot. What problem could it be?
Also..
I ran the prime test and there's error, what could be wrong?
P4 3.0Ghz -HT | pair 512MB Corsair XMS | 160GB SATA | ATI Radeon 9600Pro 128MB |
SB Live! | 430W ANTEC | I-Cube 5566 | XP+SP2 | DDR400
My Bios settings are 2.5/8/3/3 DRAM
200/66/33 CPU/AGP/PCI
[Sat Nov 13 01:48:05 2004]
Compare your results to other computers at http://www.mersenne.org/bench.htm
That web page also contains instructions on how your results can be included.
Intel(R) Pentium(R) 4 CPU 3.00GHz
CPU speed: 3006.84 MHz
CPU features: RDTSC, CMOV, PREFETCH, MMX, SSE, SSE2
L1 cache size: 8 KB
L2 cache size: 512 KB
L1 cache line size: 64 bytes
L2 cache line size: 128 bytes
TLBS: 64
Prime95 version 23.8, RdtscTiming=1
Best time for 384K FFT length: 12.568 ms.
Best time for 448K FFT length: 14.958 ms.
Best time for 512K FFT length: 17.308 ms.
Best time for 640K FFT length: 20.468 ms.
Best time for 768K FFT length: 25.268 ms.
Best time for 896K FFT length: 30.041 ms.
Best time for 1024K FFT length: 35.022 ms.
Best time for 1280K FFT length: 45.201 ms.
Best time for 1536K FFT length: 56.501 ms.
Best time for 1792K FFT length: 64.302 ms.
Best time for 2048K FFT length: 71.478 ms.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
[Sat Nov 13 01:59:20 2004]
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
--
Memtest86
It completed Test 0-7..
Test 0 had no errors. However Test 1-7 had errors from 80+ to 8000+.
Does that mean my pair of 512MB Corsair XMS ram (new) is faulty?
Mine's a new system, when I run 3DMark2001SE Pro Benchmark test, it runs
up to Test 6 and "illegal operation occurs" followed by immediate
hanging on my PC, have to reboot. What problem could it be?
Also..
I ran the prime test and there's error, what could be wrong?
P4 3.0Ghz -HT | pair 512MB Corsair XMS | 160GB SATA | ATI Radeon 9600Pro 128MB |
SB Live! | 430W ANTEC | I-Cube 5566 | XP+SP2 | DDR400
My Bios settings are 2.5/8/3/3 DRAM
200/66/33 CPU/AGP/PCI
[Sat Nov 13 01:48:05 2004]
Compare your results to other computers at http://www.mersenne.org/bench.htm
That web page also contains instructions on how your results can be included.
Intel(R) Pentium(R) 4 CPU 3.00GHz
CPU speed: 3006.84 MHz
CPU features: RDTSC, CMOV, PREFETCH, MMX, SSE, SSE2
L1 cache size: 8 KB
L2 cache size: 512 KB
L1 cache line size: 64 bytes
L2 cache line size: 128 bytes
TLBS: 64
Prime95 version 23.8, RdtscTiming=1
Best time for 384K FFT length: 12.568 ms.
Best time for 448K FFT length: 14.958 ms.
Best time for 512K FFT length: 17.308 ms.
Best time for 640K FFT length: 20.468 ms.
Best time for 768K FFT length: 25.268 ms.
Best time for 896K FFT length: 30.041 ms.
Best time for 1024K FFT length: 35.022 ms.
Best time for 1280K FFT length: 45.201 ms.
Best time for 1536K FFT length: 56.501 ms.
Best time for 1792K FFT length: 64.302 ms.
Best time for 2048K FFT length: 71.478 ms.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
[Sat Nov 13 01:59:20 2004]
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
--
Memtest86
It completed Test 0-7..
Test 0 had no errors. However Test 1-7 had errors from 80+ to 8000+.
Does that mean my pair of 512MB Corsair XMS ram (new) is faulty?
Facebook
Twitter