2400+ Mobile 35w...how good of a O/Cer.

[DaFOBulous1]

Which are faster stock....who might result in better O/Cing. I'm sure the mobile would but to the extent it be better than the Barton's when they are O/Ced as well?

Need to make decisions soon....any help is appreciated.

 

[ts3433]

Mobile would probably OC the most, but assuming they're all Barton core, they'll perform the same when put at the same FSB and multiplier.

 

[DaFOBulous1]

So one if they are all the same price is the best performance?

Any websites to compare these CPUs?

 

[sangyup81]

i had heat issues with the 35w 2400+

 

[Sentential]

While some people got decent results my AXP 2400+ 35W was a real piece of shit. I later got a 2600+ M which was a whole lot better. I suggest you do the same

 

[Jeff7]

2400M 35W (1.35v) from Newegg:
Did 2.3GHz @ 1.75v. Probably capable of higher, but my Alpha 8045 couldn't keep it from exceeding 62C.
Dropped down to 2.2GHz, 1.70v. Peaks at 58C. Still a bit high, but I can't do much better. Maybe some super-huge heatsink, with a 120mm fan would keep it cool, but that's a big investment for maybe 200-300MHz, if I go to 1.8v. Or water cooling - bigger investment, of time, money, and risk.


2400M 45W (1.45v) from Newegg:
2.0GHz, no matter what voltage. I think it's around 1.70v also - that system's powered down now due to power supply problems.

 

[Munky]

I'd definitely go with a mobile barton and OC it, instead of paying more for a regular barton. I got a 45w xp-m 2500 (also from newegg), and it does 2.45ghz on 1.78v running 54 degrees C at full load. Im using a vantec va4 hsf (the one with the tmd fan) + AS5 + 2* 12cm case fans, and it's stable too. Maybe I got lucky on that one, but usually the mobiles OC pretty well.

 

[Shimmishim]

i've had a 2400+ 35w and a 2500+ both hit 2.7 on air with 1.95 volts....

 

[Gunslinger08]

I'm currently running my 2500+ mobile at 2.45 with 1.675 vcore. Highest this crappy motherboard will volt it to. Load temps are about 47, so I think I can probably boost it to 2.6 or 2.7 when my new mobo comes in.

 

[DaFOBulous1]

Thx for the reply guys...I have these choices and because they are all the same price...not sure which I would pick.