2250 vs 2400

[lithium726]

im doin this on a barton 3000+, nforce2, and pc3200 kingston. should i go with 200x12= 2400, or 225x10.5=2250. theres that 150 mhz difference, but theres also a 50 mhz diff in the bus speed, so what should i run it at? it runs cooler at 2250 too...

 

[deadseasquirrel]

Originally posted by: lithium726
should i go with 200x12= 2400, or 225x10.5=2250

225x10.5 is 2362mhz not 2250mhz.

If you're truly running at 225x10.5 (2362) then that is better than 200x12 (2400).

However, according to my quick calculations, if you're really at 225x10 (2250), then that is not as good as 200x12.

 

[Richdog]

10.5*225 is better, stick with it.