2100+ Treb B Overclocking Trouble

[calvink]

I am having trouble getting at Stable overclocked 2100+ System, I want to do 13x166Mhz = 2166Mhz (XP 2700+). I have the voltage set at 1.775V actual is 1.81V, on a N-Force2 Soltek SL-75MRN-L. I installed a Radeon 8500 LE, because I was experiencing funky lines at 133FSB. I have 512 of Samsung 2700 2.5 DDR, And my heatsink is a Vantec AeroFlow (seated with AS3). The temps are in the upper 40's using the ABSII (Die Temperature). My powersupply is an Enermax 300W. The stepping of the Chip is a 0301. Thanks.

 

[Shimmishim]

Originally posted by: calvink
I am having trouble getting at Stable overclocked 2100+ System, I want to do 13x166Mhz = 2166Mhz (XP 2700+). I have the voltage set at 1.775V actual is 1.81V, on a N-Force2 Soltek SL-75MRN-L. I installed a Radeon 8500 LE, because I was experiencing funky lines at 133FSB. I have 512 of Samsung 2700 2.5 DDR, And my heatsink is a Vantec AeroFlow (seated with AS3). The temps are in the upper 40's using the ABSII (Die Temperature). My powersupply is an Enermax 300W. The stepping of the Chip is a 0301. Thanks.

you say pc2700 but your sig says pc2100

if it's pc2100 you're overclocking to pc2700 speeds, that may be your problem.. you may have to try looser memory timings to get it to work at 166 mhz fsb

 

[calvink]

My sig is for a different rig, thanks.

 

[Shimmishim]

hehehe sorry about that....

why don't you try upping your vcore some more or your vdimm a little by .1 and see if that helps the stability

i dont' thnk it's a heat issue yet...