200x13= 1300mhz?

[KydLynx]

So after some problems getting this thing started I finally get an OS to boot.

asus a7n8xe deluxe.
mobile 2500+
512 pc 3200 corsair.
1.65? vcore
fresh install of xp...sp1 or 2 still not installed (dont know if this matters)

so i have been playing around with bios all day and i cant even get it to stock levels "1.8"
ive put it into OC range and it still isnt at 1.8

i have no clue what im doing wrong or not...maybe its the board or chip

also, when i move windows around with the mouse, it skips/jumps around like its under load.
And webpages dont even scroll smoothly.

 

[charloscarlies]

The a7n's have problems with the 13 and up multis I believe. It looks to be dropping to the lowest possble multiplier for the board. Check it in CPU-z. I may be wrong on this though.

12x should work.

The choppiness you are talking about sounds like you haven't installed video drivers.

 

[KydLynx]

Originally posted by: charloscarlies
The a7n's have problems with the 13 and up multis I believe. It looks to be dropping to the lowest possble multiplier for the board. Check it in CPU-z. I may be wrong on this though.

12x should work.

The choppiness you are talking about sounds like you haven't installed video drivers.

cool. yeah i just installed some catalyst drivers and the choppyness went away.

ill try it out under 13.

do i have to set my ram to anything in particular?

 

[KydLynx]

Originally posted by: charloscarlies
The a7n's have problems with the 13 and up multis I believe. It looks to be dropping to the lowest possble multiplier for the board. Check it in CPU-z. I may be wrong on this though.

12x should work.

The choppiness you are talking about sounds like you haven't installed video drivers.

charloscarlies is a pimp!!!!!!!!!!!!
i got it to 1.9!!!!
200x9.5 works like a charm.

Do you know what I should set SPD to?
Auto? Right now I have it at 100%

 

[charloscarlies]

Originally posted by: KydLynx

Originally posted by: charloscarlies
The a7n's have problems with the 13 and up multis I believe. It looks to be dropping to the lowest possble multiplier for the board. Check it in CPU-z. I may be wrong on this though.

12x should work.

The choppiness you are talking about sounds like you haven't installed video drivers.

charloscarlies is a pimp!!!!!!!!!!!!
i got it to 1.9!!!!
200x9.5 works like a charm.

Do you know what I should set SPD to?
Auto? Right now I have it at 100%

No problem glad to help.

As for your ram, that depends on what sticks you are using. I always like to manually set my timings to the rated speeds just in case the SPD isn't reading correctly, but that's up to you.

 

[JSSheridan]

The maximum multiplier available to you on the processor is 12.5, so keep that in mind as you overclock. Peace.

 

[MustangSVT]

Originally posted by: JSSheridan
The maximum multiplier available to you on the processor is 12.5, so keep that in mind as you overclock. Peace.

what's the max multiplier on athlon XP 1600+ ? im using it on k7s5a and it wont go over 12.5x no matter what I try.. if i go any higher, it goes down to 6x...

 

[charloscarlies]

Originally posted by: MustangSVT

Originally posted by: JSSheridan
The maximum multiplier available to you on the processor is 12.5, so keep that in mind as you overclock. Peace.

what's the max multiplier on athlon XP 1600+ ? im using it on k7s5a and it wont go over 12.5x no matter what I try.. if i go any higher, it goes down to 6x...

It isnt the max multiplier of the chip...but of the board. Test it out and see.