2.8C with AOpen AX4C-Max........*240FSB*......

[shoman94]

Edit: Figured it was a waste of space..

 

[shoman94]

230FSB+DDR460@cas 2.5,3,3,7 ..................................2.8C @ 3.23ghz.....1.49v Actual

AIDA32(v3.5)...............................................Read:5089 / Write:1988

Sandra2003
Memory(buffered).........................................INT:5301 / Float:5319
Memory(unbuffered).....................................INT:3102 / Float:3150
CPU Arithmatic..........................................ALU:10057 / FPU:2793\6241
CPU MultiMedia...........................................INT:14946 / Float:23828

PCmark2002......................................CPU:8021 / Memory:9665 / HDD:1033

CodeCreatures(1024x768)......................................31.2 fps

3dMark2001SE(default)............................................15,406 3Dmark Link

UT2003(v2225)......................................FlyBy:180.6 fps / BotMatch:80.4
UT2003 HardOCP CPUBench...........................640x480-114.11fps

Prime95:..........................................Best time for 256K FFT length: 7.291 ms.
........................................................Best time for 320K FFT length: 9.707 ms.
........................................................Best time for 384K FFT length: 11.780 ms.
........................................................Best time for 448K FFT length: 14.156 ms.
........................................................Best time for 512K FFT length: 15.943 ms.
........................................................Best time for 640K FFT length: 20.741 ms.
........................................................Best time for 768K FFT length: 25.219 ms.
........................................................Best time for 896K FFT length: 30.984 ms.
........................................................Best time for 1024K FFT length: 33.475 ms.
........................................................Best time for 1280K FFT length: 47.446 ms.
........................................................Best time for 1536K FFT length: 58.726 ms.
........................................................Best time for 1792K FFT length: 72.824 ms.

PiFast:.................................................Total computation time : 62.11 seconds

If there are any other benchmarks you would like let me know. I haven't pushed it beyond here yet......I hope I have more...

 

[SupermanCK]

AIDA32(v3.5)...............................................Read:5089 / Write:1988

Sandra2003(buffered)..................................INT:5301 / Float:5319

crazy numbers man...congrats...is 230 is highest u can go without increasing vcore?

 

[shoman94]

I haven't pushed it further yet...I'm trying to keep 1:1 CPU:Mem ratio at the moment....... I'm actualy undervolting at the moment..

 

[oldfart]

Heck with the 1:1! Drop it to 5:4 and lets see what it will do!

 

[shoman94]

Originally posted by: oldfart
Heck with the 1:1! Drop it to 5:4 and lets see what it will do!

tomorrow I plan on playing a little.....

 

[duncan888]

i have more or less the same setup,
I am runng my 2.8C at 3.2Ghz with 1.6x memory ratio.
memory is on 2,3,3,7

 

[Jeriko]

Can't wait for my 2.8C and Radeon 9800. I think I'm gonna explode between now and next Thursday.

-J

 

[shoman94]

 

[Jojo1971]

show us some numbers shoman - more benches!!!!

 

[shoman94]

What are Sandra's Unbuffered settings so I may test it?

 

[shoman94]

Unfortunately it seems this motherboard does not like being at anything but 1:1 FSB/MEM ratio.

 

[jhites]

Originally posted by: shoman94
What are Sandra's Unbuffered settings so I may test it?

Un-check the eight boxes after Use 50% Memory Only.
Un-check Enable Buffering/Block-Prefetch
9 boxes to uncheck altogether.

Have you tried running fsb higher than the 230fsb?

 

[shoman94]

Originally posted by: jhites

Originally posted by: shoman94
What are Sandra's Unbuffered settings so I may test it?

Un-check the eight boxes after Use 50% Memory Only.
Un-check Enable Buffering/Block-Prefetch
9 boxes to uncheck altogether.

Have you tried running fsb higher than the 230fsb?

Thanks....

Yes I have but this AOpen doesn't do different memory ratios.....it needs a bios update for sure. I had issues with my 533mhz P4 also.
I was able to get 250fsb but things weren't to stable beyond WinXP.

 

[duncan888]

the Aopen board does do different memory ratios

 

[shoman94]

Originally posted by: duncan888
the Aopen board does do different memory ratios

Hehehehe...what I was saying is that It doesn't like running at different memory ratios......

 

[shoman94]

I'm running stable at 240FSB now.....3.37Ghz.....I would have to say that's pretty much it.....I can run windows as high as 250fsb but it's not stable.

I will post benches soon.......