2.53 SL6S2 Multiple VID from Frys - 3.477Ghz

[jhites]

Just picked up a new 2.53 from Fry's this morning.
Popped it in and started running 170fsb @ default vcore
1.525v BIOS (Actual shows 1.552v - CPU_Z)
The P4G8X only shows 1.525v for a low so I could not test under this vcore.

SYSTEM
. . 2.53 . . . .Air Cooled
SL6S2 - - Mfg Week 49, 2002
FPO/Batch L249A570 ? 0487 Malay

Asus P4G8X Deluxe - Tweak BIOS 1004-013
Corsair TwinX512-3200LL 2X256mb
Alpha PAL8942 w/Sunon 50cfm fan
Arctic Silver III
Lian Li PC60
Antec True480 Power Supply
Maxtor Plus9 6Y120P0 120Gb
Maxtor D740X 6L040L2 40Gb
ATI AIW Radeon 9700 128Mb (340/326)
Lite-On 48X24X48 CDRW
Iomega Zip750 Internal
Soundblaster Live 5.1
Memory Timing Set CL2-6-2-2-1T
PCI locked at 66/33

SiSoft Sandra 2003

CpuID. . . . . . . Mem-Buf . . . . Mem-UnBuf . . . . . . . CPU . . . . . . . . MultiMedia . . . . DDR
170fsb = . . . 4189 / 4185 . . 1929 / 1994 . . . 8298/1862/4241 . 12890 / 16358 . . 340mhz
180fsb = . . . 4470 / 4441 . . 2104 / 2120 . . . 8862/1974/4486 . 13654 / 17346 . . 360mhz
185fsb = . . . 4570 / 4563 . . 2180 / 2191 . . . 8953/2028/4623 . 14035 / 17804 . . 370mhz

Sandra 2002 SP1

CpuID. . . . . . . Mem-Buf . . . . . . . CPU . . . . . . . . MultiMedia . . . . . DDR
170fsb = . . . 4188 / 4185 . . 6383/1737/4016 . 12870 / 15957 . . 340mhz
180fsb = . . . 4440 / 4437 . . 6774/1838/4253 . 13632 / 16908 . . 360mhz
185fsb = . . . 4564 / 4563 . . 6982/1892/4372 . 14017 / 17377 . . 370mhz

PassMark Performance Test v3.5
. . . . . . . . . . P4G8X
170fsb . . . . 430.6
180fsb . . . . 451.9
185fsb . . . . 461.9

PC Mark 2002
. . . . . . . . . . . CPU . . . . . . . Memory . . . . . HDD
170fsb . . . . 7932 . . . . . . 8608 (1:1) . . . 1184
180fsb . . . . 8368 . . . . . . 9061 (1:1) . . . 1194
185fsb . . . . 8543 . . . . . . 9301 (1:1) . . . 1188

3D Mark 2001se

170fsb . . 16895
180fsb . . 17386
185fsb . . 17795 3DMark Link

3Dmark03

170fsb . . . 5071
180fsb . . . 5107
185fsb . . . 5236 3DMark Link

 

[jhites]

Going to kick it up to 180fsb = 3.420Ghz
Run some tests and see what happens.

 

[Daaavo]

NICE!


Temps?

 

[Boyne7]

that is definately a nice chip
i plan on doin somethin like it with my 2.66
im goin for 166fsb with my watercooling
it can already do 155 on air

Good luck with 180 hope you reach it
that would be awesome

 

[THUGSROOK]

wow very nice :Q

 

[Mikki]

:Q:Q:Q

 

[mrman3k]

Was this a retail or OEM proc?

 

[jhites]

Still at default voltage thru all benchmarks so far.
3DMarks up next

mrman3k
The SL6S2 is an OEM chip.
It is a Multiple VID release.
You can read about it Here.

Enquiring minds want to know.

FYI - I am benching first and letting the ASIII and Chip set in.

Will be running Prime95 in a day or two in order to find the sweeeeeet spot.

I just want to see what this little girl can do.

Temps are at 46C idle and have seen up to 51C when running benches.

 

[human2k]

OMG, you lucky bastard!

 

[jhites]

180fsb benches completed = 3.420Ghz

Had to increase vcore to 1.55v BIOS = 1.585v Actual
to complete 3DMarks.

Going for 185fsb next = 3.515Ghz
Am I getting nervous

 

[THUGSROOK]

nearing the end ~ still awesome tho for a 19x mplier!

 

[jhites]

Originally posted by: THUGSROOK
nearing the end ~ still awesome tho for a 19x mplier!

Yup - When we start uping the vcore the end is definately near.
Then good old P95 always cuts it down a notch or two.

 

[jhites]

Increased vcore to 1.625v BIOS = 1.664v Actual

Multi-Media Sandra

Memory Buffered/Un-Buffered

CPU Arithmetic Benchmark

CPU_Z 3.515Ghz

 

[ChampionAtTufshop]

stupid question im sure, what is this "multiple VID" thing?

 

[THUGSROOK]

it has 3 possible built in default vcore settings.

1.475, 1.5, 1.525

not quite sure the purpose of it tho

 

[jhites]

Originally posted by: ChampionAtTufshop
stupid question im sure, what is this "multiple VID" thing?

Product change late last year Look here for brief pdf

Just for kicks and could this thing really do 3.6Ghz
Surely not on air cooling
CPU_Z @ 3.611Ghz 190fsb

 

[PliotronX]

Holy Jesus those multi-vids are nuts!

 

[jhites]

Anyone interested in my old crummy oem 2.4b SL6RZ

I think it just got replaced.


Running Prime95 NOW!!!!!!!!!!!!!
Down to 183fsb @ 1.65v BIOS
Full load dropped vcore to a low of 1.59v and temp
peaked at 60C for a high after about 35 minutes of P95.
Still running - No errors yet.

 

[human2k]

how much you want for that slow 2.4b ?

 

[caboob]

Great job!! interested to see where you're prime stable. Best i can do is 173MHz. May jump on another one if I can find one that's recent (a 2003 born-on date).

 

[DAPUNISHER]

That's a screamer you have there, congrats and with a "Sunon 50cfm fan" I mean screamer in more ways than one

 

[jhites]

Prime cut me down to 183fsb = 3.477Ghz
vcore = 1.69v
Maximum temps = idle 42C load 60C
Ran it from 1130PM last night until now (5.5 hours).
Looks like that is where she will stay for a while.

It actually boots up 193fsb into WinXP but will not complete
3DMark benches even with 1.71v actual. That is the max vcore
that I would be willing to run it at.

 

[Thor86]

Originally posted by: jhites
Prime cut me down to 183fsb = 3.477Ghz
vcore = 1.69v
Maximum temps = idle 42C load 60C
Ran it from 1130PM last night until now (5.5 hours).
Looks like that is where she will stay for a while.

It actually boots up 193fsb into WinXP but will not complete
3DMark benches even with 1.71v actual. That is the max vcore
that I would be willing to run it at.

Damn, 3 and a half Ghz on air. Sweet stuff and congrats.

 

[maxSe]

:Q:Q:Q:Q