• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

2.45ghz barton oc

S

SuperStrokey

Golden Member
Well i have got as much out of this setup that i can get, im very happy with the results aswell. Here are the details:

FSB 223 mhz
locked multi at 11
vcore:1.775
vdimm: 2.9
timings: 22211 PC3500 hyperX
ratio:1:1
Mobo 8rda+ no mods
Temps: 48 load, 42 idle (cool room)

Its seems very stable at these speeds and i think there is more in the chip but not the mobo. I can boot into windows at 225 (22211 timings) but i get memory dumps. i tried relaxing the timings too and that didnt help either so im pretty sure its not the ram. It could be the chip but i side on the mobo. Its not a bad setup
 
Very nice..Tons of raw power with great timings....A guy around these parts has a barton of equal speed and even an athlon64 oc'd to 2.3ghz and that chip can hang with his athlon64 3000+...beat it at stock settings I believe he said...
 
Yes it did pass a prime 95 runn for 6 hours. I took it down to 1.75 vcore and a fsb of 220.

Stepping is:

AXDA2500KV4D 2361537190455 AQYFA 0343XPCW

 
Hmmm...my 2600 Barton can make 2.3Ghz...I haven't tried to push it any higher...maybe I should.



TGHI
 
To get to 230fsb, you'll likely need to do a few things:

1) Change memory timings to either 11-3-3-2, or 12-3-3-2
2) Raise Vchipset to the max. Sometimes a voltmod is needed.
3) You can go higher on the Vcore. Just keep loaded temps in the low to mid-50s.

rms
 
Yeah im very happy wiht it, im just gonna run it at 2.42 with a 220 fsb for a nice round number. Im pretty sure that the epox is what is holding me back but at those speeds im not too unhappy 😉
 
Wow, that's a great o/c! I've never really pushed my Barton 2500+ to see how far it can go, although I haven't had much luck getting anything stable above 200 FSB. I ran 11x200 for quite some time, and lately I am running 11.5x200. Both are rock solid and
\at load (Prime + SuperPI + Internet + ...) my cpu temp never go above 40C (mbm). I have some Mushkin LvII PC-3500 (BH5) RAM coming, and maybe that'll give me some FSB headroom. Thanks for posting your results; you have inspired me to push a little harder.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top