180mm fan holes measurements?

[lsv]

Hey all,

I'm looking to find measurements for a 180mm fan, I am cutting some metal to build a port blocker for a Fractal Arc Midi for a friend and can't find exact measurements anywhere. He did tell me 165mm edge of hole to edge of hole but I don't want to muck it up.

A PDF that could print 1:1 would just be perfect 🙁

Is my best bet to find a 180mm fan locally and pencil in the measurements?

Thanks,

Lsv

 

[lehtv]

Is my best bet to find a 180mm fan locally and pencil in the measurements?

You could ask someone with an 180mm fan to do the measurements for you. Sorry, I don't have one... 😛

 

[Kenmitch]

Looking at the item in this link it states 165mm bolt spacing.

http://www.frozencpu.com/products/9...l_and_Filter.html?tl=g47c221s1068&id=9BAwdsoy

 

[lsv]

Looking at the item in this link it states 165mm bolt spacing.

http://www.frozencpu.com/products/9...l_and_Filter.html?tl=g47c221s1068&id=9BAwdsoy

See I got the 165mm from a friend but is that 165mm from the center of each screw hole or 165mm from the edge and I place the hole touching the 165mm wall?

 

[Kenmitch]

It should be on center of holes.

 

[lsv]

It should be on center of holes.

Awesome, thanks. Time to drill these holes =)