1800MP not reporting right speed!!

[montypythizzle]

i have no OC options (limited oem bios)
and it should be set to auto
should i switch the jumper on the board from 333/266 to 133 or w.e it is

board is FIC AU31

http://img245.imageshack.us/img245/926/cpuzhq5.jpg

 

[formulav8]

You have the fsb set to 100. Change it to the 133/266mhz setting and it will be at the 1533mhz clockspeed its supposed to be at. 🙂



Jason

 

[formulav8]

If its truly the AU31 model, then is is the nForce2 chipset. You can run any thoroughbred cpu and most barton cpu's which will be much cooler and perform better.


Jason

 

[montypythizzle]

Originally posted by: formulav8
If its truly the AU31 model, then is is the nForce2 chipset. You can run any thoroughbred cpu and most barton cpu's which will be much cooler and perform better.


Jason

i did check the jumper as it was on 133/166 and not on the 100mhz pins

i used the same board with my xp3000

hmm may have to mess around more in depth