1800+ 190x10.5Mhz, anyone gone beyond this?

[screw3d]

I wanna know how far I can possibly push this chip without running prime95 for hours myself

Anyway here it goes...
1800+ Tbred B, JIUCB stepping at 0250, 1.85v
System temps 28 deg C, CPU 36 idle, 42 max load
Ran prime95 for hours without problems (My definition of stability)

Can't do higher FSBs without Vdd mod... just wanna know how good this chip is!

 

[Doh!]

You're exactly at the average oc. speed for 1800+ according to overclockers.com's cpu database. There's one that hit 2.1ghz using the same stepping w/ air cooling. With super cooling, one guy hit 2.5ghz with the same stepping cpu.

 

[RyanM]

Those CPU temps....are those surface temps or core? What program are you using to get the temps?

 

[screw3d]

Originally posted by: MachFive
Those CPU temps....are those surface temps or core? What program are you using to get the temps?

Surface or core?
Got these temps from Epox's USDM monitor. Gets the same from MBM anyway!

 

[screw3d]

Originally posted by: Doh!
You're exactly at the average oc. speed for 1800+ according to overclockers.com's cpu database. There's one that hit 2.1ghz using the same stepping w/ air cooling. With super cooling, one guy hit 2.5ghz with the same stepping cpu.

The stats in Overclocker's does not indicate any kind of stability?

Considering that those o/c that are better than mine have a better stepping, using watercooling or are going above the generally recommended max Vcore (1.85v), I guess I'm doing fine after all :|:Q

 

[Assimilator1]

XP1700 Tbred B @2.05GHz ,1.75v
Case 25C
CPU 49C (under load running SETI,measured using 'thermal diode' in MBM)
JIUHB