1700+ incoming, should I switch out for 2100+?

[amcdonald]

I have 2 0319's from svc and a 1700+ (unknown stepping) from newegg incoming.
I'm wondering how likely it is that the 0319 will oc better than my 2100+ DUT3C 0302.
Right now I have it at 12.5x180 (2250) @ 1.7. The 2100+ maxes out a little past 2300, no matter how much I raise the vcore.
How much voltage is typically required to get the 0319's to 2400?

 

[Corporate Thug]

what?

 

[Peter D]

Originally posted by: shady06
what?

 

[amcdonald]

Geez... Captain post-a-lot can't tell that i accidently hit enter without typing the body of the message.

 

[Corporate Thug]

Originally posted by: amcdonald
Geez... Captain post-a-lot can't tell that i accidently hit enter without typing the body of the message.

GEEZ, SOOOORRY . to answer your question, the 1700+ that are coming in most likely are gonna get to right around where your 2100+ is at, somewhere in the 2200-2300 range, possibly a little bit more but not much

 

[INGlewood78]

Think the 1700+ can get 2.3 ghz easy. Got mines at 2.3 @ 1.7v

 

[Shimmishim]

i'm sure the new 0319 can do 2.3 ... but 2.4 is all a matter of luck..

 

[amcdonald]

Thanks... I'll test them out.

 

[sodcha0s]

got my svc 0319 at 2.2g with stock core (1.5) I have gotten it higher by bumping the core up a bit, but I'm happy with 2.2g for now... I doubt 2.3 would be a problem for these things, 2.4 a possibility.

 

[Corporate Thug]

looks like the 0319's are even better than the 0310's

 

[sodcha0s]

OK, now at 2.3g (202x11.5) using 1.6 core and 2.7v mem. Memory timings are very conservative (8-3-3-2.5), it won't post if I set them any higher. Using Corsair XMS 3200, any suggestions?

 

[4x4expy]

Originally posted by: sodcha0s
OK, now at 2.3g (202x11.5) using 1.6 core and 2.7v mem. Memory timings are very conservative (8-3-3-2.5), it won't post if I set them any higher. Using Corsair XMS 3200, any suggestions?

Have you tried to see what the highest fsb you can do with a 12x multi? This might be a motherboard issue, but I have mine at 12x200, completely stable. At 12.5x 200, everything seems fine, I have even downloaded/installed files, played games for half hour or so without a hitch but, it fails prime95 on the first line. At 13x200 it will post but never make it into windows even up to 1.85v( I didn't go higher). The odd part is that even though it can function up to 2.5ghz. If I go over 200fsb, it frequently freezes or I get spontaneous reboots, Even at 10x210! This is with TwinMOS pc3200. Back to my point. This chip can handle 2.4ghz 24/7 but the 202x11.5 you that you are running would screw me up. Just a thought.

 

[sodcha0s]

Hmmm, seemed I had the opposite happen when this thing was new. The first time I tried anything over 11 multi the system wouldn't post, but I've had the FSB up to 205 w/out problems before. Guess I'll just keep experimenting.

 

[amcdonald]

I'm setting up a new workstation - 2100+ 0307XPOW, 8rga+, kingston pc2700 cl2.5
Looks like it'll be saturday before I get the 0319's.
Results with the 2100+ will be up shortly

 

[Shimmishim]

Originally posted by: shady06
looks like the 0319's are even better than the 0310's

NAW!!!

the 0319 couldn't do 2.5 ghz but the 0310 can..