1333mHZ board and 1000mhz ram

[ThePiston]

I had the Rev2.0 DS3 which was 800Mhz and now I got the 1333Mhz board and new Firestix 1000hz ram. What do I need to do differently to get the mx out of this new setup? I guess start out at 8X400 with a ram multiplier of 2.5 which gives 1000Mhz on the ram, but what does that make the bus? Does the bus always run at 1333Mhz?

 

[GuitarDaddy]

With 400mhz your bus speed is 1600.

The only difference is your new board supports CPU's with a default FSB of 333mhz.