Search results

  1. M

    Memory timmings gurus

    OCZ CREW: I have the expert board and just got my new gx xtc pc 4000 2x1 gig ram. Could you give me timmings for 280 fsb this are my options on the board : Genie BIOS Settings: FSB Bus Frequency - LDT/FSB Frequency Ratio - CPU/FSB Frequency Ratio - PCI eXpress Frequency - CPU VID...
  2. M

    WATER COOLING SYSTEM

    Could someone tell me if this is a good system ? h**p://www.xoxide.com/koolance-exos-2-silver.html thanks
  3. M

    3dmark05 and aquamark3 scores are they low?

    are this scores for my rig specs... are they ok or low or about avg? http://pics.bbzzdd.com/users/malvare1/3dmark.jpg http://pics.bbzzdd.com/users/malvare1/100.JPG
  4. M

    how to upload pictures

    how can I attach pictures of benchmark scores? thanks
  5. M

    MSI NEO4 SLI PLAT. AND AUDIGY 2

    It will not allow me to install my audigy2 zs gamers card ? anyone knows of this issue and how to resolve it. for now using onboard. thanks
  6. M

    FX-55 OVERCLOCKING

    I have a clawhammer and now after so many trial and errors and a new motherboard, it is running at 2.84 @1.62@33c idle 41c load. *update* (i got my video cards ocled, thanks to some of the folks here using coolbits) anything past 472/1.11 after 15 mins of playing F.E.A.R with all eye candy...
  7. M

    what to use for overclocking my new bfg 7800 gt ?

    what proggy do i need to try and start ocing this 2 cards ? thanks
  8. M

    which sata channel for raid 0

    Just got my new msi k8n neo 4 sli and will be setting up 2x bfg 7800gt oc which channel is better for raid 0? on my neo2 plat channel 3-4 were able to overclock while 1-2 did not. is it the same situation here ? thanks
  9. M

    Antec NeoHE 550 ?

    got my new board and graphics yesterday but to find out my power supply is a 20 pin not sli certified. well looking at some ps this one is available at a local store. I read at another forum about an issue with the asus boards. well i got the msi neo4 sli with dual bfg 7800 gt and im wondering...
  10. M

    after I flash I can not overclock!!!

    I just flashed my bios to 1b, my computer will not boot with the same settings I've been running for the past 5 months. I lower everything back to defaults and no problem. which bios would you reccomend past 1.8 which I was running before, but temps were to accurate. Thanks
  11. M

    DFI MODELS DIFFERENCE AT NEWEGG ?

    There are 2 sli-dr boards at newegg one at $163.00 and the otherone at $189.00. Which should I buy ?
  12. M

    what is the best oc memory to buy .

    looking to overclock past 250 fsb 1:1 look at my sig for cpu I will buy a dfi lan party ultra
  13. M

    which video card to buy, no money factor

    I getting a new mb and memory and vieo card already decided on the dfi lanparty ultra and the ocz vx gold series memory I will keep my current cpu (fx55) which video card should i get ? Thanks
  14. M

    Bios and windows differences

    My OCZ memory in the bios setup reads 245mhz (im running it @1:1) but when I boot to windows cpuid reads 233 mhz for memory frequency. this is the first time it happends. My fx-55 is running@ 2.81 ghz why is this happening ?
  15. M

    PRIME95 FAILING AFTER 2 MINUTES ?

    I'm getting this msg: FATAL ERROR: Rounding was 0.5, expected less than 0.4 Hardware failure detected, consult stress.txt file. and this one: FATAL ERROR: Resulting sum was 512366299258014.5, expected: 512366298078364.7 Hardware failure detected, what could this be ?
  16. M

    FX-55 RUNNING@2.8 but

    temp. is 140 degrees F under load. what can i do to bring it down ?, is it the volts ? im running 1.65v running at 267x10.5 thanks for any help
  17. M

    Does FX-55 USE MEMORY BANDWITH

    Enough to justify the overclocking of the memory ? In real world games and applications does it make a difference ? I was able to overclock my memory to 257x11 with no crashes (thanks to a matrix that I found here) Benchmark of Ram Bandwith are in the 7140 range (sandra) but what does this...
  18. M

    OCZ Platinum rev 2 pc3200

    what would be the best setting for this memory when im running an fx-55 oc to 2.71 gigs @13x210. it seems to be the highest i can go. memory is @2.5/4/10/3 t1 on an msi k8n neo2 platinum any help ? Thanks