Search results

  1. N

    Delayed system write failure

    I had a recent problem involving my second drive, after a half hour (approximately) of my computer running I get a Delayed system write failure on my second drive usually with the error writing to D:/$(letters here) or System Value something... so I restarted in safe moode and ran some...
  2. N

    Partition problem!!!!!

    Any help ?
  3. N

    Partition problem!!!!!

    http://i29.photobucket.com/albums/c278/Northwings/U.jpg here's a pic of what It's showing me, maybe that'll clear things up alittle.
  4. N

    Partition problem!!!!!

    hello, I have a second drive, that has two partitions on it, one for extra space, and one for all my music, however when I open partition magic, I seem to have an extended primary portion, which is quite large, 160 gigs, and than I have my two partitions OVER the extended portions, my two...
  5. N

    x64 random restart

    Alright well while doing this, I went to turn on the Alerter service, and I see that Windows driver Foundation Service is not started, I try to start it, as it might bee a solution to my problem, and I get an error message saying, Could not start the Windows driver foundation Suer-mode Driver...
  6. N

    x64 random restart

    Is there a way to find a list of what drivers are running at the time where it shuts down ? Or what drivers fail right before it shuts down ?
  7. N

    x64 random restart

    Error Message Detail: BCCode : a BCP1 : FFFFFACFCE41F010 BCP2 : 0000000000000002 BCP3 : 0000000000000000 BCP4 : FFFFF8000104E8C9 OSVer : 5_2_3790 SP : 2_0 Product : 256_1 The following files will be included in this error report...
  8. N

    Looking for a job, need alittle advice

    Yeh I want to go to Full Sail because I want to do 3d modeling for movies or games, that would be hot, I started alittle bit on it, but I need more instruction. I'll def check out comp usa and best buy, I hope I can get one of those sweet beetles they drive Lol.
  9. N

    Looking for a job, need alittle advice

    We'll when I ment I built the computer's I ment drivers and everything, I've built 4 computers over the summer for my friends, I've never worked with Linux though, but I'm not sure if alot of people do, I would love not to work during high school, but I need a car, I'm also working hard right...
  10. N

    Looking for a job, need alittle advice

    Hey I really want a job putting computers together, I can do most everything aside from setting up a raid configuration, but I'm sure I can learn, I'm located in Central NJ, Does anyone have any advice of how to find a job like this, I know STAPLEs and officemax, and all the big guys, have...
  11. N

    Best and cheapest car

    Well I figured, if I'm going to get a cheap car, I'd just add to it later on. I'm defently checking out the scion stuff though. Thanks for thehelp, from the people that were actually helpful, and not judgemental.
  12. N

    Best and cheapest car

    What's the best car I can get and also the cheapest? I'd like to be decently fast, and have alot of after market support for when I get more money into and such. Thanks for the help. I'll be driving in 2 months.
  13. N

    Sockett A motherboard

    Short and simple. thanks alot.
  14. N

    Sockett A motherboard

    My friend has an AMD xp1800 and I was wondering is there an pci-e and ddr2 motherboards for this processor ?
  15. N

    MSI combo Fr and Ram clock

    NAw it's custom built, but I see no option to set speed manually.
  16. N

    MSI combo Fr and Ram clock

    Hello I have pqi ddr2 4200 memory and it's clocked at 3-3-3-8 put it's reading 4-4-4-12, I can't find where to change the clock on it? Is it in the bios or can I do it thru the OS ? If it's in the bios the only option is chaning the MHZ from 400 to 533, can anyone help, what options/menu's...
  17. N

    Any desktop musicians ?

    Well I understand that, but no matter what the distortion on my guitar is going to be to much for it. I don't mean actualy distortion of the music wave, I mean my DOD metal distrotion pedal.
  18. N

    Any desktop musicians ?

    Haha yeh that's the software I use, but I'm looking for hardware to make it sound nice, right now I just play thru an adapter 1/4 to 1/8th I think basicly from guitar jack to head phone jack,and plug it into the line in, which sound horrible.
  19. N

    Any desktop musicians ?

    Hello I've been looking for a product that would let me record my guitar straight into the line in, without horrible distortion to tone. I don't have a good mic, and I'm also looking to upgrade my sound card, so if anyone knows a good combo, I was looking at thea audigy 2 zs platnium, but my...
  20. N

    OCZ's power supplies any good ?

    I've got a modstream 520, it's great, it helps to have a case with a supoprt bar, to hold the ATX wire in place, it's a very heavy and stiff wire, so you might have it hitting up agains the door, if you have a window there anyway. And it looks awesome too.
  21. N

    Best heatsink and fan ?

    Ahh thansk a bunch guys, I didn't know that, I never monitore the temp of my CPU till my last computer died cause of over heating. thanks alot.
  22. N

    Best heatsink and fan ?

    Really? There supposed to run that high ? So 100/104 degrees is normal under load ?
  23. N

    Best heatsink and fan ?

    I have an lga 775 running 100 F on load, what is the best lga 775 heat sink to get ? I was lookinag the AOPEN one but I can' find reviews on it, I need to drop it like 20 degrees, is that unreasonable ?
  24. N

    Rate my mod

    Hahaha, well the actual mod, is I took clear plastic pipping and put the extra waires from the temp monitor thru it, than there's strip lighting inside the plastic, I'll try to get a better pic, I'll get my friend's camera and take some real pics.
  25. N

    Water Cooled system

    Probably both my VGA and my CPU
  26. N

    Rate my mod

    Haha I know it looks overkill but that pic is kinda bad, I can't seem to get the lights to actually look red like in my comp, and I choice the prescott because I heard it was better for rendering times and I do alot of 3d modeling for school.
  27. N

    Water Cooled system

    Well my room gets VERY HOT in the summer, which is ending but still, my system temps reached 114 in my room this summer, I kept it off most of the summer, I do wantto OC, but I havea prescott so the heat would be crazy, hence why I'm asking about water cooling. I'm just specitcal because it's a...
  28. N

    2 Gb ram or 7800gt?

    I got PQI 2gig ram latency 3-3-3-8 They are nice for gaming. And I know there a kinda no namish company but if you look up the reviews there ram keeps up with OCZ's.
  29. N

    Water Cooled system

    Hey, I'm debating going water cooled or not, are there good enough systems out to go water cooled yet? and do you think if I wait for the popularity to increase and the price to go down ? What are the disadvantages, Or best system out now ? I have an lga 775 mother board. Thanks for the help.
  30. N

    Rate my mod

    That's real hot advice, and yeh I think it's a crappy pictures cause right now it's a blend of blue and Red.
  31. N

    Rate my mod

    3.2 pentium 4 64 bit, 7800 gtx overclock 500/1.35, PAI 2 gb pc2-4200 Latency 3-3-3-8. OCZ modstream modular power supply.
  32. N

    Rate my mod

    http://tmobilepictures.com/photos/photo...7d3b.jpg?_rh=52hpsko7dof0ppv6hmusxn1hy More pics coming soon, I know it looks cluttered, but I have a nzxt case so all the temp monitor wires are in there.
  33. N

    24 pin connection question

    No one knows ?
  34. N

    Ram question

    Haha thanks a bunch, very simple and percise answer I was looking for.
  35. N

    Ram question

    No I have a combo motherboard, it has ddr2 slots and ddr slots, so I can still get the pc2-4200 ramm right ?
  36. N

    Ram question

    Yeh I think pc2 just means DDR2 memory, Thanks alot for the help. But if anyone knows what it means please post here, cause I'd hate to buy the wrong Ram, it's usualy a pain to return ram when you bought the wrong kind.
  37. N

    Ram question

    https://www.monarchcomputer.com/Merchan...=PROD&Store_Code=M&Product_Code=140686
  38. N

    Ram question

    IS there a difference in PC2-4200 and pc-4200 ? Cause I'm about to buy ram but it says pc2-4200 and I know I have pc-4200 in there right now? Will they still work good ?
  39. N

    24 pin connection question

    What's the advantage of a24 pin connection than ?
  40. N

    24 pin connection question

    Hey I got a modstream power supply with the 24 pin atx connector, and my motehrboard is compadable, if I use it do I have to plug the power into my Pci-express card ? or does that extra 4 pins power the pci-express card.