Search results

  1. S

    How hot is your LOAD temps on 3.5ghz+ Conroes

    ambient 19 1.475 vcore 400x9 8+hrs orthos idle 32 load 41
  2. S

    I'm thinking of upgrading to the Corsair HX520

    i've had mine ever since they came out , and not 1 problem with it did anyone mention how quiet they are ? can't hear it over my hard drives or other fans
  3. S

    Cable Management DIY guide *update 2* photos added!

    give this stuff a look i have had several purchases from these guys and all went very smoothly http://www.mnpctech.com/UChannel.html
  4. S

    First-timer window case mod

    http://www.mnpctech.com/UChannel.html this stuff does'nt look as bad as the window channel lock that comes with most kits . i have purchased from these peeps befor (twice) and been very happy with their service
  5. S

    Corsair HX520W & HX620W

    am enjoying the quiet out of mine (now to silence the hard drives)
  6. S

    Where Is the best places to get Yate Loon DS12?

    http://www.petrastechshop.com/ not sure on the shipping chages but these guys are really good to deal with
  7. S

    Is this a good Liquid Cooling kit?

    or another great welth of info http://www.xtremesystems.org/forums/index.php good luck which ever way you decide to go
  8. S

    Opteron 146 CAB2E overclock

    congrates on a good chip ,just watch those temps closely and you should be ok go up the voltage ladder gradually you should be able te see a scale of temp increases
  9. S

    so what do you guys think about aspire 680 watt psu

    thanks guys for the resurrection of this thread , and the interest in the outcome first off letme say this about pcp&c ,first rate company ,with a great c/s atittude, called them on the following monday , i asked for an rma , they said no problem, called the next day and asked if i could...
  10. S

    so what do you guys think about aspire 680 watt psu

    G.Y. thats what i ment by working things out with pcp&c in the above post pushed the power button and the fireworks began (twas berath takin") actually i have 2 150cfm and 1 30 going in and 2 30's out and 1 115 going out all at about half speed red bluff it tis tom howard thats a...
  11. S

    so what do you guys think about aspire 680 watt psu

    howard thats sage advice (and am going to follow it) but have been thinking that the 510 just was'nt quite enough for this system and this gives me a reason (excuse) to go to the 850 if i can work things out with pcp&c
  12. S

    so what do you guys think about aspire 680 watt psu

    your how to pick a psu is fantastic its bookmarked thanks thinking about going to the pcp&c 810 that should handle this machine ok , your thoughts would be very appreciated tom
  13. S

    so what do you guys think about aspire 680 watt psu

    i live in oregon and dont get much sunshine
  14. S

    so what do you guys think about aspire 680 watt psu

    i have read a lot of your posts and i respect your pc knoledge and have followed some of it as with the links have read them both thanks i would follow any suggestions and links fullmetal ya i have some pos psu running it with alot of stuff disabled and back to stock thanks
  15. S

    so what do you guys think about aspire 680 watt psu

    as per your request G.Y. unfortunately this is the best i can do with the equipment that i have sorry its not as clear as i would like http://img131.imageshack.us/img131/6848/pcpcpics034large5sp.jpg
  16. S

    so what do you guys think about aspire 680 watt psu

    i'll get on it right away
  17. S

    so what do you guys think about aspire 680 watt psu

    G.Y. toooooo funny assfire or expiretoo good this thing is only about 7 months old but i gotta tell ya it was pretty exciting there for a few seconds, will be rmaing it next week so for now will use a decent psu (build with it later) and again thank everyone so much for the support i have...
  18. S

    so what do you guys think about aspire 680 watt psu

    510 sli 34a- 38a peak turned on the box and called smokey the bear i know that powering on takes a lot more juice then just using the pc but what an exciting few seconds it was
  19. S

    so what do you guys think about aspire 680 watt psu

    ya but it shows nothing on the out side
  20. S

    so what do you guys think about aspire 680 watt psu

    sorry guys i took my specs off my sig due to a little flaming so here they are opty 170 @2.7 1.475 v core 1024 ocz gx xtc 4000 2x 7800 gt stock d-5 pump and thanks for your help
  21. S

    so what do you guys think about aspire 680 watt psu

    ya there is ,but when it literally exploded with sparkes and flame ,i just cant bring myself to trust it any more
  22. S

    so what do you guys think about aspire 680 watt psu

    my pcp&c psu went down in a fireball and need to get a replacement , was thinking about the aspire beast 680 12v1=22 12v2=24 all input is really greatly appreciated tom
  23. S

    cooler master stacker

    i have done body and fender work for the past 25 years so it has become second nature to me . its all in the prep work of the surface your working with, mask off the areas you dont want to be painted, keep the paint applicator moving ,dont stop in 1 spot you'll run the paint ,take practice...
  24. S

    cooler master stacker

    http://img145.imageshack.us/img145/2161/4thstackerpics006large5pm.jpg this is my painted stacker to prep the case go to the store and get yourself a couple of green scotch brite pads and start scuffing the case when the shine from the paint is gone blow out the case then wipe it down with a...
  25. S

    Watercooling computer guide

    that is one of the best tuts i have seen, the pics are great and the info equally so fantastic job
  26. S

    Clamps for tubing

    just about any local hardware store should carry them ,ace,home depot , lowes,true value tom
  27. S

    List of Watercooling stores and case mod's stores

    nice post and its right time for a STICKEY please i have done buisness with sidewinders on 2 occasions and am very pleased with their service usually next day sent plus a tracking number and iirc phone numbers on the web site (always a plus)
  28. S

    preping water cooling

    its just the last 2-4 weeks that they seem to be having trouble seems when ever i want some info from them thats when their down really hope you have fun with your new cooling solution tom
  29. S

    preping water cooling

    http://www.xtremesystems.org/forums/index.php hi there bigKr33 i cant remember if i linked you to this befor but between this forum and the linked on you will get an answer to your question maxx over at xs has stickeys up in the water cooling section that are a very good read so while you...
  30. S

    a8n32-Sli and watercooling problem

    welcome to the forums rsb123 2 instances of prime and mine get to about 35-36 but if you feel like giving it a try by all do so (but the price you pay will be to keep us informed)KIDDING hth tom
  31. S

    finding the right water block

    thats above ambient temps my average ambient temperatures are at 27to 28 degrees cel. the load is with dual prime tom edit: i agree with aigomorla the storm is really the best on the market do a google for reviews
  32. S

    finding the right water block

    i've got the tdx and am very happy with the performance of it idle is about 4* and load is about 10* above ambient with an opty 170 @ 1.55 v the storm is the best performer on the market there's only a couple of degrees differance between the two the deciding factor for me was which one...
  33. S

    CM Stacker questions

    give this link a try for those inside shots i used this for planning the w/c project that i just finished a couplle of weeks ago hth tom http://www.newegg.com/Product/Product.asp?Item=N82E16811119042
  34. S

    Where to buy opteron 165 0550, 0608 or 0610

    http://www.tankguys.biz/ call these guys direct and talk to them Ben can probably help you out great folks to deal with this is the only place i will buy a cpu
  35. S

    Case for A8N32-SLI Deluxe

    i vote for the stacker T01 i'm water cooled and don't have the side flow fan and my board temps with 2 instances of prime are in the mid 30's this case has probabal some of the best air flow that you can get jmho tom
  36. S

    Car cooling question.

    find a import mitchell manual and in the front of that specific car it will tell you how much ref. and oil it needs
  37. S

    Computer placement question

    nice looking desk but my wife has a desk very similar to that ine with the puter in its little cubby hole and last summer she had 3-4 shut down due to over heating (no a/c), she took it out of the "hole" and no probs for the rest of the summer tom
  38. S

    Cable Management DIY guide *update 2* photos added!

    talcite now look what you've gone and done,........................ started an epidemic of tidy case wireing ,and they say it might be spreading good for you keep up the good work i really appreciate what you did to my case thankyou tom
  39. S

    CM Stacker 810 review

    it was a real toss up between the T01 and the 810 but with big hands the T01 won hands down (pun intended) i could hav modded the 810 to suite my needs but i have a hard time cutting a 200 dollar case up (auto body tech) but i dont have a prob cutting into a jag or a porsche tom
  40. S

    CM Stacker 810 review

    http://img145.imageshack.us/img145/2161/4thstackerpics006large5pm.jpg here is the T01 the only diff between this and the 810 is the T01 has room at the bottom of the case for another power supply i was looking at the 810 but the extra room the T01 had won out hth tom oops forgot...