well, I have a 1900gt and went for the Artic Cooling x2, just because the stock fan was LOUD.
I get a standard overclock on my card:
650mhz gpu
1440mhz ddr3
hmm.. I dont know, but it seems to load apps faster. But I wonder.... It is 2am
My PC didnt blow-up with the registry entry, so it appears safe to use.
thanks!
Ok that makes sense, I decided to order a replacement HSF for the system, at SVC.Com. I went for an SLK-800 and a 48cfm 80mm fan, that at some Artic Silver hopefully will knock that temp down to a more reasonable level.
Thanks for confirming that I was not missing the obvious jumper or switch...
Hi,
The manual and www reviews state that this board can go between 1.65-1.85 on the vcore. Im at 1.75 (lowest I can go), and my cpu is running a tad warm on idle (43-46 C). I installed the uber 1003 and 1004 bios and have been unsuccessful in seeing anything lower than 1.75volts. Am I...
Hi,
If anyone is interested I downloaded and installed a 14 mb XP SP1 pre-release and after a reboot my floppy was back!
GET IT HERE
I have been banging my brains out trying to figure out this problem that appeared out of nowhere, for no reason at all.
In my device manager, windows...
I thought I had researched enough before I bought the 266mhz version. But maybe someone else on the board can verify that I dont have to modify the chip to make it run at 200mhz FSB? Im begining to think that may be a problem, I wonder if there is a pencil trick to making the chip believe that...
the only system that I was able to test the processor on was a compaq system. So I was limited to like 900mhz since there was no multiplier setting to be found. I ran the system for 4 hours with just a screensaver and it worked fine, So I decided to test the power supply, and heatsink. So I...
Well, I just popped the 1.2 tbird out of my system and replaced the trustee old duron @900... I was getting good temps on the tbird @1.2... MBM 5 was reportin 42-43 celcius.. Under load of Seti it shot up to 50 but ran stable, in idle it was like 38 degrees. These are almost identical to the...
Ok here are the details for my setup...
*Abit Kt7 Bios Revision for 5/11/01 "kt7zt bios"
1.2 AXIA (Line one: A1200AMS3C; Line two: AXIA0115BPHW" Athlon 266mhz
Multiplier set @ 12*100 = 1200mhz
Voltage @ 1.88 (according to Motherboard monitor 5)
*ATI Radeon LE Overclocked to...
Its a Leadman powersupply 400watter, I purchased it a long time ago with my first athlon slot A @650mhz. I was having problems back then with the 650 and a weak 250watt powersupply, and bought this monster. My wife got this mobo and athlon and a leadman 300watter (on the AMD list).
I didnt...
I had been running a Duron 600@900 since last september on my trustee Abit KT7. With the prices of athlons having dropped so much, I figured it was time t retire my good old duron and get a tbird on my KT7. I decided to go ahead and keep my KT7 until the KG7 is a definite solution on the DDR...
I've been using this combo since last June, when a decent Driver was released by S3.
It works great, and I do play some games here and there but overall I just use apps.
Star Trek Elite force
Star Trek Armada
are some of the most recent games I have played and they looked good. I have played...
woo-hoo!!!
I went ahead and checked the boot disks I was using to find out that they were bad! argh! anyway I went ahead and booted with a win98se CD and formated a couple of system disks. After that I downloaded what appeared to be the latest bios from abit, and it worked! I reflashed the...
Hahaha,
I have yelled every swear work imaginable, and have also reset the CMOS1 jumper several times. I have unplugged the Power supply as well and done it, reset holding the insert key, even taken the battery out for a few minutes. I just emailed microbarn to see if they will just give an...
Ok I have an abit kt7 board (non-raid), and the new cpu gives me the same problem.
Its actually a week 0023 core, the L1 bridges are not cut on this one, so I figured it would just boot. I would guess that then the board might have gone bad, Im not sure I will try any ideas that can be given to...
of course I killed the duron, now... I just got the brand new duron in UPS right now and to my surprise I still get the same boot error from the bios.
"Award Bootblock Bios v1.0
copyright (c) 1998, Award software inc.
Bios Checksum error
Detecting floppy drive A media..
Insert system...
hi there,
Im sad to say that a stable overclocked Duron has bit the dust. I thought that I had done plenty of research when looking for a cooling solution for my buy.com Duron 650mhz. So I went ahead and jumped on the alpha 6035 heatsink. Well over the last week I began having my PC run at...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.