Search results

  1. E

    HELP with ITune mess up!!!

    okay, am not going to bash this worthless piece of shxt program, i need some serious help. I've recently checked some wrong options in Itune, let it reorganized my music folder (over 30GBs), and of course it messed it up fubar. I've sorted out my folder tree by music genre, and then album, which...
  2. E

    Gigabyte ds3 undervolted? can't shut down

    Just got a new DS3, rev2.0, for some reason my ArcticCooling freezer7 Pro fan is not spinning(it jerks on and off every other second)usually needs to finger it to jump start and keep it spnning, even when it's spinning, it's very slow, RPM is around 300. I wonder if this a under-voltage problem...
  3. E

    ATI, AMD roadmap leaked.

    http://www.chilehardware.com/articulo.php?sid=1631&mode=thread&order=0&thold=0 Brief info: R600 will be build for PCIE2.0, 521bit memory bus, DDR4, 2ghz, DX10.b(theoretically 40% faster than the 8800GTX, need a PCIE2.0 board to fully take this advantage), same time released will be the AMD...
  4. E

    Help with setting up Intel Matrix

    After reading 'entering the matrx', i was inspired to do the following: I've recently acquired a Baraccuda 7200.9 500GB, with 4X125GB platters. My question is, how do i slice the harddrive using matrix, so that I can arrange 3-5GB out of each platter, making sure they are all sliced from the...
  5. E

    System can't detect IDE device after stand-by

    Got a strange problem, everytime I recover from stand-by, my IDE harddrive and DVD Rom seem to disappear, had to reboot the computer to gain access. My motherboard is the Asus P5wDH, SATA mainboot, AHCI enabled but set to basic, ACIP support enabled, ACPI compliant. Any fix?
  6. E

    Klipsch Ultra 5.1 users, urgent help needed(low volum)

    I just got a new set of Ultra 5.1. Did what the manul said, connected all thing properly and cranked up all volum in window to 75%. However, the speaker is barely audiable at 50 in controller pod, literally mute below that, had to crank up to all the way to maximum(80) to get some mild...
  7. E

    Matrix RAID config

    anyone please post a step by step Intel Matrix RAID config. How to do it? how to slice my pair of raptors in RAID0 and how to install system on it. Thanks
  8. E

    Asus P5W DH SATA setting help

    Hi everyone, got some problem with the board. I have 1 raptorx one SeagateSATA20, one WD IDE, bios reads them all as IDE, and raptor doesn't even show up at post even though it works fine in windows. I configured the SATA as standardIDE when installing windows, afterwards I figured out a way to...
  9. E

    help with setting up SCSI & RAID0

    hello fellas, I recently grabbed a pair of 36GB, and 1 18GB Fujitsu SCSI U160 15K HDDs, planning to get a Adaptec ASC-29160N, what i am not sure is how to set them badboys in RAID0 format, do i have to get another RAID controller(I have an ASUS P5WDH, it comes with a RAID controller)? I am new...
  10. E

    help with setting up SCSI RAID0

    hello fellas, I recently grabbed a pair of 36GB, and 1 18GB Fujitsu SCSI U160 15K HDDs, planning to get a Adaptec ASC-29160N, what i am not sure is how to set them badboys in RAID0 format, do i have to get another RAID controller? I am new to SCSI, can someone post a simple walkthrough? I like...
  11. E

    SCSI RAID0

    hello fellas, I recently grabbed a pair of 36GB, and 1 18GB Fujitsu SCSI U160 15K HDDs, planning to get a Adaptec ASC-29160N, what i am not sure is how to set them badboys in RAID0 format, do i have to get another RAID controller? I am new to SCSI, can someone post a simple walkthrough? I...
  12. E

    Asus P5W DH memory setting, SATA setting

    OC on a P5W DH, MB won't post for FBS beyond 360 1:1, have to enable SPD to go beyond, which always gives crappy timming. is there anyway to manully set mem timing while OC to 400+fbs? memory is OCZ 4-5-4-15 rated @DDR800, 2.1V. Another problem, i have a SATA and a PATA HDDs, what's the...
  13. E

    20pin to 24pin power supply

    I have a 480w power supply, but it only has 20 pin. It fits into the 24 pin connector, but I feel there isn't enough power feed into the motherboard, which might be the reason of constant crashing. Is there any way to connect another 4 pin on top of the 20pin in that connector? I am thinking...
  14. E

    7900GTO massive heat, missing thermal pad?

    Folks, just got this bad boy card. I took off the fan and reapplied silver5 on the GPU. Also got rid of thermal pad on memory chips without realizing there's quite a distance from the chip to the heatsink, so when the fan/sink closes, mem chps can't touch sink. Results, good GPU temp, 48 ish...
  15. E

    Issues with OCZ PEL 6400, P5W DH, C2D, OC

    Hi forks, I bought a pair of ocz platinum xtc DDR2-800 4-5-4-15, 2 GB kit, runs on my Asus P5W DH. I've been experiencing some random crash, blue screen(with memory dump), system fail to post or freeze in BIOS. Tried some overclocking too, but the memory won't run above 345mhz, which is way...