Search results

  1. C

    Netgear WG311 Install troubles

    Ok fellows I am stumped. I have a Netgear WG311 v1. which I recently installed into my newer PC. What happens is I phyically install it windows recognizes the card as Ethernet controllerand when I go to install the drivers it finds then and then right before it finishes it locks my computer up...
  2. C

    Cat 6.3's and 3DMark03 Bug?

    Okay I just installed the new Catalyst 6.3's and decided to see what 3DMark scores are with the new driver's to see if ther ewould be any improment. I started with 3DMark2001SE and worked my way up.. but was stopped short when 3DMark03 would run the first graphics test Wings of Fury and strat...
  3. C

    My 3700+ San Diego Overclock 2.6Ghz

    Okay I overclocked my AMD 3700+ San Diego to a very stable 2604GHz a 400Mhz increase from the stock 2.2GHz. I am runnig 248 FSB/HTT a 10.5 CPu Multiplier and a 5:6 Ram ratio at 333 for an effective 200Mhz. I ran Prime95's ImPlace large FTT's for 18 hours's at those settings.. here's a...
  4. C

    Stupid Question?

    Okay dumb question.. Is the only way to find what type of ram I have on my Graphics card (PowerColor X1900Xt) to take the heatsink off? and look at the ram modules? I ask because I want to attempt to flash my card to a X1900XTX and all my research has come to that I need 1.1 ram to run at XTX...
  5. C

    Newegg's Shipping...

    Okay I ordered some stuff... over the weekend. For example I ordered a new mobo, gfx card, PSU and a monitor and HSF. Everything goes to plan on monday, sucessfully payed for and ordered. I recieve my tracking #'s and everythings fine. Now the problem is my order was split.. because one item was...
  6. C

    Antec SP2.0 500Watt good enough for a X1900XT?

    Will this be good enough for a X1900XT? Becuase if not this sucks since I just bought a PowerColor X1900XT and that PSU. But everything I read says a 450watt PSU that has a *Single 12v+ 30a line not two 12v+ rails... I hope this won't cause and problems.. It shouldn't should it?
  7. C

    Internet Not Working

    Okay, I am on my other computer because my internet just spontaneously stopped working. I have a MSI K8N Ne2-F w/ a Marvell betwork Controller. The computer just stopped sending and recieving network packets. My network connections say that Local Area Network connection is on and connected yet I...
  8. C

    Hard Decision

    Okay im in a fix I am upgrading my computer anf I pretty much know what I want to get. It either will be: ASUS A8N-E nForce4 ultra Western Digital Caviar SE 250GB SATA HD EVGA 7800GT 256MB PCI-E or PowerColor X1900XT 512MB <--- Torn Antec Smartpower 2.0 500w PSU ZAlman CNPS9500 SAmSung...
  9. C

    X800 Crossfire?

    I am upgrading my computer and I have see that at newegg. X800 Crossfire is only $189. Would be picking up 2 and a Crossfire board be worth it in the long run. I am running a 6800GT as of right know with a AMD 64 3000+ Oc'd to 2.4 GHZ. and have a gif of RAM.
  10. C

    Overclocking problem...

    Okay I have succesfully figured out my max safe FSB/HTT can go up to 300. I also figured out that my AMD 64 3000+ can get up to 2.4 GHZ my problem is that if in my bios I set the proper HTT/FSB, CPU Memory and HT settings my computer dosn't post just hangs and I have to reset my CMOS. What I...
  11. C

    My First Overclock...

    Well I finally OC'ed my system. Not too much since I don't trust my PSU and and the Stock HSF too much (Antec 350W). But with a Athlon 64 3000+ I was able too get it very stable at 2205 MHZ from its stock 1800 MHZ. I set the HT x4 (978) and the FSB/HTT 245, running my Kingston ValueRAM at 166...
  12. C

    What would you do....

    Okay I have a little decision to make. I am going to have $750 to play with in a couple of weeks and I want to upgrade my computer somewhat. I am going to give my specs, what would you do to this system with $750? Specs: Cpu - AMD 64 3000+ Venice Mobo - MSI K8N Neo2-F (MS-7025) Skt 939...
  13. C

    Best Performance for RAM?

    Hello, I am asking for help in determining what would be my best course of action for my RAM situation. As is I have a Gigabyte of Ram.. consisting of 2x512 chips, 1 512 PC3200 and 1 512 PC2700. They are running Dual-Channel at 1t. I am getting replacement ram chips. A set of 2x512 PC3200...
  14. C

    K8N Neo2-F MotherBoard LAN Problem

    Hey, I just rebuilt my system with an AMD 64 3000+ and a K8N Ne2-F Mobo adneverything goes really smooth except the computer won't recognize the Ethernet controller. It will say "Found new hardware" installing driver's blah blah. But then another tghing pops up and say error there is a problem...
  15. C

    PSU Which to use?

    Hey guys, Which PSU should I use I have 2 A Maxpower 400w (havn't heard great things from them) and a Antec 350w PSU which would work better in this setup? Mainboard : MSI K8N Neo2-F Processor : AMD Athlon 64 3000+ @ 1800 Mhz Chipset : nVIDIA® nForce3 Ultra RAM...
  16. C

    Dual Channel or single? 512 or 1Gb

    What do you all think? I have 3 sticks of PC3200 Ram. One is a 512mb Double sided Samsung stick. The other's are a DC Pair of Kingston 256Mb Sticks. These will be In a MSI K8N Neo2-F Motherboard, which would give me better performance? the 1Gb running single channel or the 512 Running dual...
  17. C

    XP 3200+ Random Overheating?

    Hey Everyone I am new to these forums and have a predicament for you. Okay here it goes... I built computer about 8 months ago with the folowing specifications. CASE: Antec Black Quiet Super Mid Tower CPU: AMD Athlon XP 3200+ HD: WD80Gb & WD40GB MB: ASUS A7N8X2.0 400FSB RAM: 1Gb...