Search results

  1. T

    Overclocking Phenom 9950 BE on Crosshair II

    I did, I have the latest BIOS.
  2. T

    Overclocking Phenom 9950 BE on Crosshair II

    I tried stressing it with CPU-Z running and according to CPU-Z the voltage didn't go up it stayed at 1.232. Interestingly enough I went back to the BIOS and changed the Vcore from 1.4 to AUTO, and the CPU multiplier to x14, and was able to boot to windows. The system however wasn't stable...
  3. T

    Overclocking Phenom 9950 BE on Crosshair II

    I just noticed that CPU-Z states the voltage of my CPU at 1.232 volts, even though I had set the CPU in the BIOS to be at 1.4 volts. I know this board has problems displaying the actual memory timings in the BIOS, any chance that the board is not actually increasing the voltage to the CPU...
  4. T

    Overclocking Phenom 9950 BE on Crosshair II

    Ive set the memory back down to 800 mhz, and up the cpu multiplier to 14 for a total of 2.8ghz, and the system still bluescreens. I kept the timing lose on the memory and left it at 1.9 volts. Id like to know how those review sites are getting theirs all over 3ghz. The board I have has...
  5. T

    Overclocking Phenom 9950 BE on Crosshair II

    I guess I could try that, and if it works I would be happy with it. Nonetheless I shouldn't have to. Ive seen articles on Anandtech where they get their Phenoms to 3.5ghz on just air!
  6. T

    Overclocking Phenom 9950 BE on Crosshair II

    Asus Crosshair II update with 8030 BIOS 8 GB OCZ Reaper PC2 8500 Phenom 9950 BE 1200 watt PC power and Cooling power supply I must say this board has been extremely finiky. It took me several days to hand set the memory timings so that it would run without blue screening all the time. I...