Search results

  1. A

    Replacement antennas for PCE-AC68

    It would seem the antennas are simple omnidirectional 2dBi for 2.4 and 5Ghz. A suggestion on another forum was Delock: http://www.delock.com/produkte/F_558_ehftechnik_891_5-8-GHz.html?setLanguage=en But with the additional cost of three antennas the total amount would be around the same as the...
  2. A

    Replacement antennas for PCE-AC68

    I've been offered a PCE-AC68 but it doesn't come with the original antennas and I'm wondering if anyone knows what I can get that would be equivalent to the original antennas?
  3. A

    DH67CF concurrent DVI & HDMI

    Just to clearify things. The issue was more with the kfa2 streamhd rather than the board. There is a button (source?) on the remote (that came with the kfa2) that iniciates a manual connection between the hdmi dongle attached to the board and the receiver attached to the TV. Pressing it makes...
  4. A

    DH67CF concurrent DVI & HDMI

    I hooked the hdmi port to a KFA2 StreamHD and I cut the power to the receiver and then reconnected it; which caused the motherboard/OS to detect the TV.
  5. A

    DH67CF concurrent DVI & HDMI

    Hi! I just got this board and I hooked it up to the tv with hdmi for a short while waiting for a monitor to arrive and it worked fine. Now the monitor has arrived and I connected the board through DVI to the monitor and through HDMI to the TV. The problem is the board stopped sending a...
  6. A

    Lian Li PC-TU200 Build

    If i don't recall incorrectly the vrm on the asrock don't have heat sinks. Someone tried mounting some heat sinks and it seems to help but doesn't resolve the downclock issues. It sucks since many where planning on using the xxxK cpus with z68 on the itx boards. Me included.
  7. A

    Lian Li PC-TU200 Build

    I read on hardforum that the cpu down clocks it self due to heat issues on zotac and asrock z68 mini-itx boards.
  8. A

    Lian Li PC-TU200 Build

    Just a heads up.. If you went with the h67 chipset you won't be overclocking much.
  9. A

    Case thats easy to move around?

    You're looking for the Lian Li PC-TU200 :)
  10. A

    sandybridge and 2560x1440

    Thank you for the answers. I was thinking of running two monitors with one 2560x1440 through the displayport and another 1920x1080 through the HDMI concurrently with a i5 s2405 on an Intel DH67CF-B3. Judging from the manual (p16)...
  11. A

    sandybridge and 2560x1440

    Can sandybridge run a 2560x1440 resolution without issues? This would be for everything else than gaming. Ie the i5 2405s that has the HD3000 gpu. Edit: I found the answer here: http://software.intel.com/en-us/articles/quick-reference-guide-to-intel-processor-graphics/
  12. A

    disable cores, get cache?

    I have a i7 920 (1366) and the cache structure (according to CPU-Z) looks like this: L1 Data 4 x 32 KBytes , 8-way L1 Inst. 4 x 32 KBytes , 4-way L2 4 x 256 KBytes , 8-way L3 8 MBytes, 16-way And I was wondering if I would to disable half the cores (2 out of 4) would the remaining cores...
  13. A

    Seagate Harddrive Safe to buy?

    I just got a Seagate 1.5TB and made sure it had firmware CC1H and I can tell you that I don't have any problems and I keep a good eye on the drive with Sentinel. The problems they had with the 1.5TB were the ones made in Dec-Jan.
  14. A

    Hard Drive dissapears sometimes

    What you should do is to check the forums on seagate.com to see if your drive is one of the unlucky ones: http://forums.seagate.com Tools to see if your drive has the bad firmware: http://seagate.custkb.com/seag...ocId=207931&NewLang=en The firmware available should your drive be...
  15. A

    Is windows 7 going to have WinFS?

    dx11 Regarding FS, I wouldn't really know but, they chopped it up and integrated parts of it into other applications such as sql2008 and ado.net with the statement that once it was ready it would be fully integrated into windows.
  16. A

    Asus P6T Deluxe Question?

    I left the back cover in place and only plugged in a 4pin. Works like a charm with: 4850 1Raptor+2sata 620w
  17. A

    Will Corsair CM3X2048-1600C7DHXIN damage my i7 920?

    just reduce the voltage to 1.65 and if it boots it should work fine..
  18. A

    Questions about Intel Quad Cores...

    I feel I have to add my opinion here =) I went from: Pentium 4 820D 1GB 667Mhz DDR2 to: i7 920 6GB 1600Mhz currently at 1066Mhz just last week. With the Pentium I was running XP cause Vista was to much for the processor or I didn't have enough ram for it. But with i7 and 6GB...
  19. A

    Buying first Dell... i7 vs. Q9550

    As much as Dell has fallen, HP seems to have improved. Seems like while Dell invested in cut backs and improved margins HP invested in actually improving their products; not cost reducing them.
  20. A

    Buying first Dell... i7 vs. Q9550

    ok.. I'm a little to late, but.. Unless things have changed since I bought a XPS 600 from dell a couple of years ago: The motherboard is custom and the components are gimped versions of what is available in retail even though they carry the same name and logo. Both the motherboard and the...
  21. A

    Nehalem rigg

    Sorry, you're completely correct about the speeds! I mixed up my current speed with what the 920 has.
  22. A

    Nehalem rigg

    Regarding the PSU, the reason I'm going with the corsair is because people say it's quiet and ok quality. Would a PC Power & Cooling run more silent?
  23. A

    Nehalem rigg

    I've made a list of components for a Core i7 rigg: Asus P6T Deluxe Intel Core i7 920 2,66GHz Box Corsair XMS3 Twin3X DDR3 PC12800/1600MHz CL9 3x2GB Corsair CMPSU-620HXEU 620W Antec P182 Black 3x Noctua NF-S12-800 120mm 2x Noctua NF-P12 120mm Thermalright Ultra-120 Extreme...