I am just trying to get the same content on the 3 PC's i use.
I copied all of the main Media player contents to my flash drive hoping i could load it onto the other two but cant figure out how to????
is this possible? does anyne know how i can get all three players with the same music...
Thanks for the reply.
I ended up using the insurance and got a new one. cost me less than 50 bucks that way. i was just wondering if any place would be good and cheap to fix it. i wanted to fix so as to not have the issue with replacing alll the address book but had to anyway.
i have a dell laptop with vista and recently when i open up multiple internet windows and when i close one a message pops up that internet has stopped working and it closes out every window and then reopens one to my homepage? can someone help me stop this from happening? it is very frustrating...
i am doing some "work" at home. i have what in my signature and i was using the onboard video but i thought if i put the 6200 back in it might speed it up a bit. i am working with electronic medical records and have to assign form numbers to every page flipping page by page. with my onboard...
UPDATE : my wife goes to get ont his morning and it wont connect so we call tech support. they send someone out. he tells us that the number we have is 34 and 38 and it needs to be between 40-50. he said we have to much signal strength. so he installs a splitter and gets it to 42. so its good...
i unplugged everything and this morning before i truned on my PC i plugged the power to cable modem and then plugged in ethernet cable then truned on PC and it works. dont know why but it works
thanks so much for the help
i did all that and everything looked good. but it still dont work.
i then disabled the usb and only had the what it calls local area connection 4 i had it enabled and it still wont work.
i know i seen yellow mark last night but now there is no yellow mark.
that is what i thought. i will try and find it in the BIOS tongith and see if i can make it work. it is working fine to me though. this is warp speed compared to dial-up. which i used for 11 years. sad, very sad.
it'll probably be two weeks before i can order a router.
can someone tell me...
i went into the BIOS and looked around but it had been so long since i been in there i couldnt find the right thing i guess. i'm going to have to study up on it again. might even get out the "book". can you tell me what tab to look under in there ?
also i have no idea what a router does. is...
sorry.
i got cable internet today. always had dial-up. the installer said that the ethernet port wasnt active. then he said it wasnt disabled just not there on the list to use. under system-hardware tab - device manager then i think he said it should be under network adapters and ethernet is...
first is it faster through ethernet ? second why wont my ethernet port show up ? the installer said its not even on the list to pick from.
i know dial-up, i dont know anything about this. please advise.
is there a way to make it when i hit Shift+S that it will do the function F5 + enter + enter ?
i have a lot of times i hit F5 then enter then enter then F5 and so on.
all i can find says this board GIGABYTE GA-M59SLI-S5 Socket AM2 NVIDIA nForce 590 SLI MCP ATX AMD Motherboard is the best. my question is "is there a little brother non SLI to this board ?
this is from the site.
Model
Brand SCEPTRE
Model X9g-Naga V
Cabinet Color Black
Display
Panel TFT LCD
Screen Size 19"
Widescreen No
Display Type SXGA
Maximum Resolution 1280 x 1024
Recommended Resolution 1280 x 1024
Viewing Angle 170°(H) / 170°(V)
Pixel Pitch 0.264mm...
i am looking for a good (cheap) 19" LCD and see one that is listed as having .264 pixel pitch and all the rest have .294. i have searched a few sites and from what i can tell 19" is supposed to have .294. so am i right to say it is either a misprint or the .264 would be better veiwing quality...
one question ? why does task manager show network utilization at or below 50% most of thew time. mostly like 33 or 15 % . is there a way to speed up my utiliztion ?
"it" told me i needed a DVD Code and recommended me sites to go to to get it. that is why i got it. the WMP is what wouldnt paly it. although i knew i should have asked here before shelling out 15 bucks for it. sorry about that. i had already bought Roxio burner but it didnt fix it when i...
on my new PC now and just wanted to thank everyone who helped me. this thing is awesome compared to what i did have. the only thing that sucks is the dial-up part. oh and having to "buy" software to watch a DVD. that didnt make since to me that XP doesnt have that ability. oh well...
why the 800 ram ? just get two of these http://www.newegg.com/product/product.asp?item=N82E16820161657
i had the Conroe fever but once the dust settles would you really be able to tell the real world difference between the 3800+ and the 6300 ?
i just put together my "budget" PC and i have a problem.
at about the 8th boot up i get new hardware found and it says PCI Bridge Device ?
WINTEC AMPX 512MB 240-Pin DDR2 SDRAM DDR2 533 (PC2 4200) Desktop Memory
C51GM-M (V1.0) Socket AM2 NVIDIA GeForce 6100 Micro ATX AMD Motherboard...
i finally went ahead and just orderd the parts
but got this mobo
ECS C51GM-M (V1.0) Socket AM2 NVIDIA GeForce 6100 Micro ATX AMD Motherboard - 57.99
and the 2800 Sempron
so when i get this together and go into the BIOS to set up drive order is that all i have to do before...
i just cant seem to bring myself to even consider a Dell. thanks for the suggestion though.
and Zap i will look into thsoe OS's but i think i'd be hesitant to use anything but XP. but that might change once i study on it some. thanks
good one, i will probably go with the 2800 since i wont be able to see any difference with what i do.
its one of those cases where i try to rationalize "for only 10 more dollars i can get (whatever i'm considering) " but you are right that if its the "cheapest" i shouldnt even consider the...
the 299 in my figure is with XP, MOBO W/ sound and video, CPU Sempron 3000, 160GB HD and (1) 512 DDR2 Ram. already have case and 420 PSU.
and going to use keyboard and monitor and mouse i already have for now.
well i went to Dell and configured what i saw was the cheapest option and it comes to $369 so how is that better than the $299 i'm at now on Egg. including the case i have already bought for $50 its still cheaper to go the Egg route.
great reply but then my question is how "cheap" can i build an AMD system ?
what mobo and CPU ?
if i pick the 3200 for 78.99 i am $50.00 higher still than the Intel set-up.
using this mobo
http://www.newegg.com/product/product.asp?item=N82E16813131014
84.99
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.