Search results

  1. A

    C1 and speedstep

    once i have foudn my stable OC, is it ok to enable C1 and speed step. Or is this a no,no....
  2. A

    750i FTW FSB Wall @ 453 - not sure

    Ok so after weeks and weeks of trial and error i finally got my Q9450 stable @ 3.62. Current settings are as follows. CPU: 453 x 8 Ram: 1086/ 5,4,4,14 Vcore: 1.384 (load) VTT:1.3 NB: 1.5 SB: 1.2 Vmem: 2.075 GTLREF 00,00,00,00 I have see people hit 3.8ghz, so im testing out the FSB...
  3. A

    EVGA 750i FTW - CPU-Z detects chipset as 650i

    THanks guys i thougt i got robbed..
  4. A

    EVGA 750i FTW - CPU-Z detects chipset as 650i

    The subject sas it all EVGA 750i FTW - CPU-Z detects chipset as 650i. Why would this be? Is anyone else having the same problem? Will this affect my MBs overclocking abilities???
  5. A

    Q9450 not stable at 3.4Gz

    Thanks guys, ill try raising my Voltages up a few notches and see what happens. I read in one of the forums that even if the NB runs very hot the system will freeze. I touched the stock cooling for the chipset and it is warm to the touch but i dont think its that hot.
  6. A

    Q9450 not stable at 3.4Gz

    I have seen people in this forum with signatures showing 3.6 and 3.8ghz OC on this Chip...some one out there should be able to help me figure this out....come on guys ....need help.///
  7. A

    Q9450 not stable at 3.4Gz

    i did a pencil mod my bios vcore is 0.008v higher than listed by CPU-z. Also under load there is no change in voltage. This is really driving me nuts....If i were to raise teh vcore to 1.3625 woun't that cause the temps to rise alot...?? Come on guys help a noob out in his overclock.... Thanks,
  8. A

    Q9450 not stable at 3.4Gz

    I used OCCT, ran for a few minutes and froze. I also cleaned up the paste on the chipset cooling and added AS5. Still nothign changed. Curent FSB set at 400.
  9. A

    Q9450 not stable at 3.4Gz

    Hey guys, i have been hanging around this forum for months, reading and learning. Now finally decided to join and get some answers from all the experts out there. This is my setup: CPU: Q9450 @ 3.2Ghz, 1.275v core, 1.3 Vtt, 1.4 NB and 1.2 SB RAM: 2Gb Corsair 1066 @ 2.1v 5,7,7,24 Unlinked...