Isnt USB 2.0 supposed to have speeds of 480 Mbps? I am downloading pictures from my camera and the speed it shows is 335 Kbps !!! It is so slow it is driving me nuts! (yes, everything is USB 2.0 - the PC, camera & the cable...) Whats wrong with this world?
1) How do I check if my system is using the CAS Latency as specified on the memory?
2) Follow up question - How do I change the memory latency/timing settings if found that the system is not using what it is supposed to?
I checked the BIOS the other day but found nothing there that...
My system does not recognize 2GB SD cards. I have a Koutech USB Card reader, which seems to read 1GB & 512MB SD cards fine, but not the 2GB one. Recently I tried reading my dad's 2GB card for the same result. I dont know if its a hardware problem of one more glitch in Vista 64-bit OS. Every time...
I have 2GB (2 x 1GB) of Corsair XMS2 RAM (PC6400 800MHz) on my system. I am running it on ASUS M2N32 -SLI with Vista 64-bit. I am looking at adding some more RAM and found this great deal on Newegg. 4GB (2 x 2GB) for $45 !! The problem is a little specification difference. I hope somebody can...
DVDs look awful on my newly built system. i have all relevant drivers up-to-date and i suspect if the problem is with monitor or the vid card? i am running the monitor at its fullest 1680 x 1050 resolution. (system details below) i tried many DVDs and i would describe the picture as awfully...
My first ever system build came to life successfully last night. Vista Ultimate 64-bit installed smoothly and identified almost everything.
I have 2 optical drives. One SATA DVD-Burner and one EIDE DVD-ROM. (both Lite-on) When I powered up the system only detected SATA drive but not the EIDE...
Successfully started-up my first ever build last night... what a joy!!! vista-64 posted a score of 5.3, whatever that means... i am just too thrilled to think abt it for now!
i still have 2 issues to resolve though...
1) i am running vista-64 on a Raptor HDD. i also have another SATA HDD for...
hi.. i am about to finish my first build and running a final checklist. Please help me with the sequence of powering up.
1) Will the system automatically go into BIOS after starting?
2) When / how do I load the OS (Vista 64-bit)?
3) How do I assign OS HDD & Storage HDD? (I have 2 HDDs)...
Can someone guide me (or point to a reliable link...) about "what happens next" when I power up my first build for the first time.
Then I have a few specific questions-
1) Does the system automatically go into BIOS?
2) What are the things to be checked / set in BIOS?
3) How / when to...
I am trying to hook up OCZ GameXStream 700W PSU with ASUS M2N32-SLI-DLX motherboard.
The mobo has a 24-pin EATXPWR connector, to which I connected the 20+4-pins MAIN cable from the PSU. MObo also has a 4-pin ATX12V connector. The Mobo literature says - "do not forget to connect the 4-pin ATX...
I am trying to hook up OCZ GameXStream 700W PSU with ASUS M2N32-SLI-DLX motherboard.
The mobo has a 24-pin EATXPWR connector, to which I connected the 20+4-pins MAIN cable from the PSU.
Mobo also has a 4-pin ATX12V connector and the literature says - "do not forget to connect the 4-pin ATX...
Hi.. I have cooler master CM-690 case and ASUS M2N32-SLI-DLX motherboard. I am a little confused by the System Panel Connector.
1) PWR LED - Case PWR LED cable has a 2-pin connector. Connector on mobo has 2-pins but the pins are separated by an empty pin. (Case PWR LED Cable looks like - ".."...
I am building a new system for the first time. Which should be a better choice of O.S.?
1) XP vs Vista (both 32-bit)
2) XP vs Vista (both 64-bit)
3) Vista 32-bit vs Vista 64-bit
My system is -
Athlon 64 X2 5600+;
ASUS M2N32-SLI-DLX-Wireless;
2Gb 800MHz Corsair XMS2 (2x1Gb);
EVGA...
I am in the middle of my first build and stuck at installing the heatsink on CPU.
1) Motherboard: ASUS M2N32-SLI-DLX-Wireless;
2) Case: Cooler Master CM-690;
3) Processor: Athlon 64 X2 5600+;
4) Heatsink: Zerotherm BTF90
1) Does it matter which direction the fan should point? Possible...
I am upto my first build and have a little question regarding HDD selection. Would it be beneficial to have 2 HDDs? How abt the following combo -
1) 36Gb 10000 rpm WD Raptor SATA w/16Mb cache HD for OS and applications
2) 320Gb 7200 rpm WD Caviar SATA 3.0Gbps w/16Mb cache HD for storage...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.