My system is listed below. I can't seem to get a stable OC with this setup. The best I have gotten is 3.2 and stable in windows. The only glitch is when I do a reboot out of windows the motherboard cycles itself and resets. In windows in actually is running correctly. Does anyone have a...
Yes all drivers were installed before video drivers. All windows updates were installed as well. Even after I had problems with 8.8 and 8.9 I went back to 8.7 just fine.
I also tried just drivers and leaving out CCC no luck there. I put a ticket in with ATI and what they keep saying I went...
I was having trouble getting the 8.8s to install when they came out so I waited until the 8.9s and am getting the same problem. On a fresh install last night after the reboot it comes back saying problem with ati cards reinstall drivers blah blah. In either case I put back the 8.7s and it works...
I am having trouble getting a stable OC. I have a Gigabyte GA-X48T-DQ6, Q6600 and 2GB OCZ DDR 1333. I'm trying to get 3.0 ghz. This is my 2nd attempt at a OC. I had my E6600 at 3.06 on an ASUS P5WDH Deluxe last build. I can't seem to get this one going as easy. Does anyone have a similar setup...
I've done enough research now. I'm going with a Gigabyte GA-X48T-DQ6. I found that foxconn manufactures both those boards :(
Since I'm not concerned with SLI this makes sense for me. Plus I haven't read anything bad about the Gigabyte board.
I was always big on ASUS but I haven't had much luck with support from them. Looking to move to new board because this board doesn't overclock quads very well.
Current system
Asus P5WDH Deluxe 975x
Q6600
4 GB Kingston Hyper X 800
Thermaltake 850 Watt
8800 GTS 640 MB
Antec P190
Vista...
I am thinking of purchasing one of these boards. Doe anyone else have these? If so, what memory are you using, will it fit a zalman 9700 LED?
which is better overall?
Thanks
I have the newest bios.(Which I had while OCing the E6600) I have 9X333 1.4 VCORE I have the Ram set to 667 1:1. Auto timings. I have the PCI-E set to 100mhz and the NB is auto.
I was reading the review to put the bracket on for the aftermarket fan on this gigabyte boardt it has a cooler on the back to the board that needs to be removed
to get the fan brace on. Any comment on the EVGA 780i? I hear it gets a little hot (NB) but other than that pretty good reviews. It...
on the GIGABYTE GA-EX38-DQ6 there is a panel on the back for cooling that needs to be take off for an aftermarket fan. The reviewer said it was easily removed. Any comment on that?
Gigabyte would be a change.I,ve always had asus but I hear a lot of complaints about the newer boards.
Also...
I have an ASUS P5WDH Deluxe and want to get a new board. I have a Q6600 and 4 1GB sticks of Kingston Hyper X ddr-800. Also have a zalman 9700 led. Does anyone have a suggestion on a board that can overclock this setup. This ASUS sux fot this. It OC's by e6600 fine but it doesn't work so...
I followed the guide to the letter. I have a P5WDH Deluxe Q6600 Go and 4 GB Kingston Hyper X DDR 800. Everything is set at exactly what you have yours at. Reboots the machine sometimes in COD 4 but thats it. Doesn't seem like a temp problem. Any thoughts?
I have a P5WDH Deluxe with Kingston Hyper-X DDR-800.
I got the chip up to the 3.0 GHZ. The system is only stable with the ram at 667. Is there something I'm missing or is there a limit to what the RAM will do in this configuration? Or is my ram just not the best for doing this?
Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.