I have a single artifact that comes up on scan artifacts and it only appears at one point. I am also able to make the artifact come and go. Basicly if I do something else it will bring the artifact up. Like if I am running scan artifacts then I move my mouse down to the bottom navigation bar and...
I have a 8800gs(550clock/800mem), at stock speeds and get a single yellow always appears at the same point when using scan for artifacts. It takes between 1 and 10 seconds to appear, this will will be gone and will do it again.
When I run atitool and the first time I scan for artifacts it...
I am running at 430x7 right now. 20 hours orthos stable. I get freeze up or restart at 445x7.
I tried it at 445x6 get same problem. Tried all sorts of different settings,Tried running 380x7 with memory multipler at 2.5 ran fine. So memory isn't a problem. Tried raising mCH voltage that did...
at 430fsb I have no problems at all ran orthos for 18 hours, never had any problems running BF2, or oblivion.
When I try 443fsb, I can get into windows usually startup orthos, then anywhere from a few seconds to a couple minutes everything just locks up. and I have to restart from my case...
runs memtest fine, but when I start up orthos and use blend it starts for a second then freezes. Then I have to restart.
Running E6300 at 450x7
gigabyte DS3
v-core of 1.325V
memory: 1.9V
FSB +.1V
MCH: +.2V
PCI-E: Normal
I tried V-COre at 1.35 but it didn't seem to do much of...
http://www.freep.com/apps/pbcs.dll/arti...D=/20060921/NEWS06/609210320/1001/NEWS
I live in Michigan, and really didn't have a good feeling about how the current govener was doing so hoping there would be someone new I wanted to vote for. Though this sure as heck means I won't be voting for...
My E6300 is currently at overclocked to 333x7(2323) and idle it's running at 22 cpu from MB, and 32 from core temp. my system is at 36C. I need to get some good circulation blowing out. I really need to get a NB fan then I will overclock much more.
Could there be a problem running it with fan...
Ihave a E6300 and DS3, at Idle I get 38 CPU, 34 System with main fan blowing out. I get 32 CPU and 43 system with fan blowing in.
I don't have that much room, but I do have a 120mm fan on the side of the case blowing in, it blows twards the Ram and CPU. I have a couple of 80mm fans lower...
I am not sure how safe it is to do this. but I hear people are having problems at like 330 fsb. I had the same problem with E6300 and DS3. adding volts, changing timings, and what ever else I could think of wouldn't help. As soon as I started up memtest at that freq it would give me lots of...
Having a E6300 I am going to need to run my NB very hot to get a good overclock out of it.
I don't really want to put a new heatsink on if I don't have to. I was looking at the stock heatsink, and it looks very much like you could add a fan directly to the heat sink. On two sides of the...
I am loving it, tried out battlefield 2 with some high settings looked amazing and really smooth. still getting everything on the HD that I need, but it seems to be working great. Everything is running really fast. I love it
Now comes the installing of all the software that I need:(
I have an Antec TruePower 500W( regual Truepower before 2.0), it has a 20Pin connector not a 24 pin. I am getting a gigabyte DS3, x1800xt, and E6300. I was wondering if it will work ok and not hurt anything.
I have been looking online and reading very mixed things, for some it works great...
New parts
E6300(will be overclocking)
X1800 XT
Gigabyte ds3
Patriot 2GB kit 5300 Cas4
320gb SATA hard drive
Existing parts
Case
Antec TruePower 500W
DVD burner
160GB IDE hard drive.
Upgrading from Athlon xp2500+, radeon 9800pro( recently stoped working well so downgraded to a...
setup 1
E6300 from ZZF for $193 free shipping
gigabyte DS3 from ZZF for $152 free shipping
crucial ballistix 5300 C3 1gb kit from ZZF for $71 free shipping
x1800xt from Newegg $200 + $6.12 shipping
total 622.12
using my current antec 500W powersupply, dvd burner, hard drive, case, fans...
I am putting together a E6300 system, main thing I am having a problem deciding on is the ram to use.
Changing up the timings what should I expect?
I am also looking at some C3 667.
Corsair TWIN2X2048-5400C4 2GB DDR2-675 XMS2-5400 for 150
http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=85016-16
That is what I think I am going to get unless there is a good reason to go with
Corsair TWIN2X2048-6400 2GB Kit DDR2-800 XMS2-6400 for 181...
I will soon be upgrading my computer, getting E6300, mostlikely DS3, X1800 xt, 2GB of ram. Just having a hard time figuring out what ram to get, I would like to spend around 150, for some quality ram that will allow me to overclock my E6300 a good bit.
I was hoping I could get some posts of...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.