Ah that Antec does look like a good deal thanks!. The server is in the living room right now so yeah I use allot of low speed 120mm fans so the noise is pretty low and want to keep it that way I'll take a look at the PCPC610 as well
-Eric
Hello all,
I have a server running 8 1TB drives and may expand to another 4
I used the power supply calculator and it says I need a supply rated at 568W
So I'm in the market for a 600w supply.
Looking for the best quality supply for the least amount of $$$$
would like it to use a 120mm...
You may find the LLA70A would fit what your looking to do or MM has come out with I new line of full tower modular cases that look very interesting. Best of luck with your high end build. See my water cooled page for pics of the LLA70A I was able to fit 1 MCR320, 1 MCR220 and 1 MCR120 I could...
Hey Thanks N7 I have heard really good things about Muskin memory. Yes your exactly right I am running at 9x423 1:1 @ 1.53v core I am water cooled. It idles @ 1.51 volts and loads to 1.53.5 during prime95. So I tried an experiment last night I dropped my freq down to 867mhz and I am able to...
Hello all,
I currently am running a set of G.Skills DDR 2 PC6400 modules now 2x2gig
my timings are 5-5-5-12 @ 1016 this is the best I can do on my
Asus P5Q Pro running a Q6600 @ 3.8ghz
Looking for a better performing set in the $70-$80 range
Any help provide dwould be much appreciated...
I agree with Aigo you do it cause it's the next level to be honest I was able to hit 3.6ghz on air with my Q6600 and lapped push/pull TRUE with decent temps I wanted someting new I was bored. Even with water I was only able to move my constant OC up to 3.7ghz water is not a magic bullet it is...
Well let me say this investment not really fun yeah lots of fun with water cooling in fact my PC has turned into a big conversation piece when people come over. They usually say water? really!?!! and I say Muwahha. Seriously I have a quad Q6600 your over clock is going to depend on allot of...
Hello all,
I was wondering if you had to use the same brand of video card to do crossfire.
My assumption as long as they are the same type you werr good to go
Thanks,
-sponge
Tried it. It had no effect :(. Some How I need to figure out hoe to get that greyed out box active then I'm pretty sure it will work. Thanks though
-sponge
Hello all,
Using windows vista ultimate
I'm trying to change the default program for the MMS:// protocol to a program other
than windows media player. I went to start/default programs/MMS/change program
but the box is grayed out to let me select other program.
Any help provided would...
I have heard very good things about that fan as well. The thing about the petra yates is they perform well and are really inexpensive. I like value when ever I can get it ;)
-sponge
Well I finally got my new yates installed on my rad looks like a net of 2c better cooling on all cores and they are quiet compared to my orange finned yates. They are black closed corner fans with slightly curved blades model 605's purchased from Petra's. The orange finned yates were model 805...
Sorry if this a known issue or a repost but I found tonight that not all low speed Yate Loon 120mm are the same. I just ordered a bunch of Yates from Petra's to replace my orange finned Yates. First thing I noticed was the two part numbers were different then I had one orange finned yate and...
Hey WB just found that my MCW30 not only is not centered on the chip it was not making good contact. I tried modifying the brackets but no go. Went back to the orig heatsink and added a small fan for now. Look like ek makes a compatible NB block so will have to look into it. You did the best...
Never mind I found the problem the Asus board has a hole offset that won't allow my MCW30 block to sit flat on the NB. Poor contact will make for high temps everytime,
went back to the orig asus NB sink and a small fan for now.
-sponge
Good idea WB, yeah its really tight and not exactly centered over the chip kind of offset a little. On my abit it was centered perfectly and not tight weird. Is NB temp monitoring offered in the asus bios?
-sponge
I was under the impression the warranty was 1 year fro abit? Well regardless I abused that board pretty bad so I would not hold abit responsible. I had a fan cooling the mosfet heat sink I just pushed it too hard it happens :)
-sponge
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.