I'm running a Winchester core Athlon 64 3200+ @ 2.5ghz with an MSI K8N neo2 platinum mobo. Now under full load from prime95 running for a while the CPU temp is pretty stable at 59C. This temp seems a bit high to me, however, the system has been running prime for almost 12 hours now with no...
My friend has two WD 80gig ATA100 drives that hes had in his system for about two years. Recently one of the drives starting clicking and corrupting his OS so he ran the WD diagnostic tools from a bootable CD and the drive failed. He ordered a new motherboard, CPU, vid card and RAM as an upgrage...
I recently put together an AMD 64 winchster 3200+ with an MSI K8N neo2 platinum mobo. I am overclocked to 2.5ghz with 1.52v, however, my temps at idle are 36-38C and at full load, they jump to 52C almost instantly and after awhile they top out at 56-58C. At these temps however, the system passes...
I recently put together a new winchester 3200+ with an MSI k8n neo2 platinum mobo and I am overclocking it to 2.5 with 1.5v. However, my temps aren't that great. I have a Zalman cnps-7000b all copper hsf cooling it as well as 4 80mm panaflo h1a case fans. My case temps hover around 23-25C...
I recently put together a new A64 3200+ winchester system with MSI neo2 platinum and I want to use my 2x512 sticks of Geil Ultra Series pc3200 ram I was using in my athlonXP rig. After following the quick and dirty guide stickied at the top, I found my cpu is 100% prime95 stable at 2.5ghz @...
I just recently purchased a new MSI neo2 platinum mobo and 3200+ winchester as an upgrade from my old athlon xp setup. When I first put it together, I formatted my primary hitachi sata harddrive and installed windows only to have problems booting and corrupt partition tables. I ran hitachi's...
I am running an Athlon XP-M 2500+ at 2.3ghz @ 1.75v with a Thermalright SI-97 heatsink and the cpu temp seems a bit high for this heatsink. I have a Panaflo 92mm H1A fan on it right now, and I am at 51C under full load. I would like to run this cpu at 2.4 @ 1.9v but the heat is immense, I have...
*Sorry for the length*
I've been having numerous display problems as of late that started when I bought my first LCD monitor, an LG 1720P. I set it up and hooked it up via analog since I did not have a long enough DVI cable yet. I immediately saw that even in the bios, there were red artifacts...
Well, it all started when I had my trusty Evga GeForce Ti 4200 8X in my pc for about a year. Then one day I saw that my pc was very dusty and I pulled it apart to give it a good clean. All I took out was the PCI cards and the video card. After blowing all the dust out I put it back together and...
My friend's previous motherboard died and he ended up upgrading to an Asus a7n8x-e deluxe with a mobile barton cpu that he overclocked to 2.4ghz with 100% stability. The only problem hes having, is that his Audigy soundcard "chirps" while playing mp3s or gaming, etc. At first, it was caused by...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.