Search results

  1. P

    DDR 500 Memory Timings on Neo2 Pt

    Ok, I have 4*512 Crucial Ballistix PC4000 memory. Currently they are set up as dual channel, 2.5-4-4-10 @ 2.85V This is the timing I get from CPU-Z too, and its SPD timings. Crucial's website gives timings of 3-4-4-8 and 2.5-4-4-8 @ 2.8V but what they give on doesnt match my config - no...
  2. P

    Can I max out to DDR 500 ? And what Timings

    Currently I am running Voltage is default (auto) DRAM Frequency 200.9 MHz FSB:DRAM CPU/11 CAS# Latency 2.0 clocks RAS# to CAS# 2 clocks RAS# Precharge 2 clocks Cycle Time (TRAS) 10 clocks Bank Cycle Time (TRC) 12 clocks DRAM Idle Timer 16 clocks How high can I go ? And...
  3. P

    Windows XP wont install on Neo2 Pt +A64 X2 4400+

    Motherboard Neo2 pt Bios 1.9 Detects A64 X2 well Ram crucial ballistiz 2GB (4*512) set by auto timings raptors raid 0 sata 1/2 while phase 1 of XP install, where it copies files from cd, it randomly gives errors... "File cannot be copied, press esc to skip, enter to retry" tried...
  4. P

    BIOS Image file is for Nforce chipset only

    I just got MSI K8N Neo2 Pt and processor p/n 7025-010 The current BIOS on the system is 1.5 I want to update it to 1.9 to support X2 4400+ the BIOS sees the processor as Hammer model unknown. anyway, I try flashing - after copying the flash util (awfl833d.exe) and bios...
  5. P

    Need Dual Core Mobo Solution

    How about somebody helping me out on the 1st questionn....about the mobo ?
  6. P

    Need Dual Core Mobo Solution

    what about an official amd price slash ?
  7. P

    Need Dual Core Mobo Solution

    ...for the following components 1] AGP8x 2] 4 Dimms (dual channel support) 3] 4 SATA (with 2 having option of HW RAID) - SATA II 'if possible' 4] 2 IDE connectors 5] atleast 2 PCI slots Thanks a lot. MSI K8N Neo2 Pt, DFI LP UT nF3 Ultra-D look good. But they dont mention support...
  8. P

    HDTV Wonder is pissing me off - help needed

    same stuff as me. what I did. Got rid of every possible ATI driver and software. Foollowed instructions given in Drivercleaner pro from dirverheaven.net. Used that program in safe mode. When back on normally, installed the WDM drivers only for the HDTV wonder. Rebooted and let all the 4...
  9. P

    HDTV Wonder is pissing me off - help needed

    I am <6.5 miles away from the tv station. so, should i get amplified one ? I do get a few bars in my room, but have to stand holding it. maybe a better antenna will do...
  10. P

    HDTV Wonder is pissing me off - help needed

    did the same. Do you have any recommendations for an antenna ? Are antennas for HDTV special or any UHF would do. For eg: http://www.rca.com/product/vie...I700619-CI209,00.html? says HDTV ready but this one is more powerful though not mention HDTV, only DTV...
  11. P

    HDTV Wonder is pissing me off - help needed

    ok i got everything working now. Driver issues. But it still gives me crap about not being an ATI and no DX and etc etc. But I got everything up and running. Now gotto gind howto get a good signal. I hardly got any signal in here. Should I get an amplified antenna ? which one ...
  12. P

    HDTV Wonder is pissing me off - help needed

    I get no error due to system.dll only dxdiag reports it to be missing. Games and all run fine. I cant find system.dll to be a part of Dx anyways on any website. How do I uninstall DX9c ?
  13. P

    HDTV Wonder is pissing me off - help needed

    https://mywebspace.wisc.edu/phora/web/error.JPG HDTV wonder is the worst product ever. Doesnt install properly. After WDM driver installation always got the "new Hardware Found - Multimedia Video Controller" popup on every boot. That driver never gets installed and had to force manual...
  14. P

    HL2 benchies

    benchies here. hope others post too. any recommendations terry for further improvemnet. Thanks to terry, Hard and Anand for the demos.
  15. P

    MX700 or MX510?

    for pure gaming, neither -> get the sniper 2100 from BFG. Its a boomslang. Need to say more ? Day to day uses : mx700
  16. P

    P4C800-E DLX Hyperthreading Not working

    no 2 cpus, infact there is no option gor processor. I only see Computer > Standard PC. I have tried replacing the HAL.dll in the system32 directory to the halmacpi.dll, but crashes windows.
  17. P

    P4C800-E DLX Hyperthreading Not working

    http://www.geocities.com/priyajeet/cpuz.txt Proc: P4 3.2 Mobo: P4C800E DLX, Rev 2.00 (seen on the mobo) but CPU-z says 1.xx BIOS: 1016.001 ATI X800XT with cat 4.9 Audigy2 DX 9c Antec 550W 2 HDD in SATA RAID 0, 2 others + DVD drive NO OCing. All stock speeds. My Hyperthreading is...
  18. P

    X800 XT PE

    Can anyone tell me where I can pre-order/buy a HIS X800 XT PE Iceq2 in the US. What are other good alternatives with the same chipset and where can I get those if not the above. Is this the platinum edition http://www.ecost.com/ecost/ecsplash/shop/detail.asp?dpno=434568 Why are there diff kind...
  19. P

    overclocking

    This is my sys summary as I got from cpuz. I am getting a new mobo - the asus p4c800E-deluxe. I wanted to know how much I can overclock. Apart from that summary -> I have thermalright sp-94 with vantec tornado on the CPU. 4 case fans -> though the case is all open. My memory is Kingston Value...
  20. P

    Best Buy

    Can anyone guide me on which motherboard to get ? which is the fastest (when not overclocked) board out there for P4 3.2 w HT. which is the best board with maximum stability when overclocked - ie good overclocking - not worried about the user friendliness of overclocking. Price around ~$200...
  21. P

    MSI neo2 questions

    I have a few questions What is the avg temp of the NB on an 865PE board ? My core center and speed fan on Neo2-Fis2r show temp ranging between 55-69C, though touching the heat sinker i didnt find it hot. (All fans running at full speed.) Is that normal, or is something busted ? Neo2 has 3 fan...
  22. P

    power supply

    I need help in deciding power supply for the following system: p4 3.2 MSI neo2-fis2r (complete with all optional parts) 2 gb pc3200 ddr nec dvd writer audigy 2 zs (no platinum) 120 gb ata133 7200 80 gb sata 7200 radeon 9600xt - but might upgrade in future to x800xt 4 * simple 80mm fans 1 * 80mm...
  23. P

    Best heatsink again

    can the MSI neo2 control the fan speed ? they give a software along called core center that shows speed /temp etc. if this is true then vantec wont be a prob.
  24. P

    Best heatsink again

    i m getting an sp-94 for $40
  25. P

    Best heatsink again

    I have a P4 3.2 on a MSI Neo2 Fis2R and i need a better cooling sys on the CPU. 1st of all - is it easy to take off the default heatsink ? or is it stuck thoroughly ? I read u guys mentioned thermalright sp-94 or slk-948...will this work on my mother board... also i read abt this coolermaster...