Search results

  1. C

    Program to sync files between two computer in Windows?

    I've used rsync before in unix but was wondering what people here use to sync folders across a network? Thanks, Cmai
  2. C

    What's the difference between a "non-booted" and a "booted" cat5 cable?

    Confused! Thanks!
  3. C

    WinXP Question: Changed file association but icon didn't change?

    I changed the file association of *.pl (perl) files from the activestate perl to gvim because I want gvim to open the file when I double click it instead of execute the script. However, the file icon did not change along with it. I can't seem to find a way to do this. Thanks, cmai
  4. C

    Is it ok to pick up a laptop while it is running? Or put it on an uneven surface?

    Willl doing this risk damading the hard drive? I'm so paranoid when people pick up my laptop while it's running to look at it and twist and turn it. Someone please comfort me.
  5. C

    Longest lasting flavor gum?

    What's the longest lasting flavor gum out there. Googling showed Bubble Yum and then Big Red....anything else?
  6. C

    In rsync, how do I something equivalent to "exclude everything BUT..."

    Anyone familiar with rsync, Say I want only several or so files from various places. How do I make rsync only check these specific files and not have to do: exclude from = exclude.test exclude.test - asdf - asdf - kitchen sink .. . . . . Thanks!
  7. C

    How do I get my perl script to automatically enter passwords?

    I'm trying to get my script to enter the password for my rsync server automatically. I tried dumping the output of the rsync command into an array, parse the array for "password:" and then print $Password. One thing I do notice though is that "password:" gets printed to the screen so it's not...
  8. C

    Where can I find freelance webdesigners?

    Hi all, I'm looking for a forum or resource that lists trustworthy freelance webdesigners. Looking for someone preferably in my local area so that I could meet up with the deisgner and discuss requirements. I don't know if this is the proper place to do this but I already got a couple...
  9. C

    "New Terminal" Hotkey in Redhat?

    Hi all, I'm looking for a way to automatically open a new terminal in Redhat without a mouse. I did a quick google on hotkeys for redhat but came up with nothing. Alternatively, a way that a new terminal would load upon boot would be great too. Like a batch file maybe? BTW, this is a...
  10. C

    How do I setup my router as a switch?!

    I'm trying to connect two 4port routers together. I have a Netgear and a Belkin Router. The Netgear is hooked to the cable modem and a port from the netgear goes the WAN port on the Belkin. My PC is plugged into a port of the belkin. Now I can get internet but it's really really slow...
  11. C

    What's the typical relationship between fan speed and cpu temp?

    For those who have temperature controlled fan throttling, do you all know what the typical temperature set points are for the fan control? i.e. If the CPU reaches say 65 degrees the fan is full throttle at 12v? Or say it goes down to 24 degC and the fan drops to 3V or even turns off? I'm...
  12. C

    Any Standalone Checkin/Checkout Filesystem like Dreamweavers"?

    Does anyone know of a standalone software that does the check in and check out file system like dreamweavers? Thanks, cmai
  13. C

    Software to compare to hard drives for data integrity and to update changed files?

    I'm trying to find a solution that will allow me to change a copy of drive and if the changes are good, update the master drive accordingly. Does anyone know of any software out there that does this? Thanks, cmai
  14. C

    Looking for a method to sync up harddrives or update specific files on them

    I'm trying to find a way to track harddrive changes and so that my coworkers are able to hook their drives up and sync up with my master. Or if they've made changes to their drive to update the master. This would save us a bunch of time and we'd be able to keep everyone uptodate on the...
  15. C

    Are logitech cordless keyboards all the same with different mice?

    I was wondering if the Logitech wireless keyboards are exactly the same. I'm interested in just the keyboard and I could save a lot of money if I just bought the cheaper set rather than the MX Duo set. Does anyone know? Thanks, cmai
  16. C

    Athlon 64 Rig (Suggestions wanted)

    AMD Athlon 3000+ Chaintech ZNF-150 3x120 GB Seagate SATA (RAID 5) <--know anything about average time till failure on these?? 1x512 PC 3200 DDR (haven't decided on a brand yet) LiteOn 52x32x52 CD Burner Klipsch Promedia GMX 2.1 (or should i get Klipsch Promedia 2.1??) DVD Drive - undecided...
  17. C

    Hardware to only power a USB?

    I want to purchase the ANTEC tube lights that pulsate to vibrations just for fun but they are USB powered. I don't have that many USB ports to spare. Is there anything I could purchase to power the lights without buying like an external usb hub? Thanks, cmai
  18. C

    Front USB won't detect certain devices?

    Has anyone had this problem before? My front usb ports can detect my mouse but cannot detect my key drive that I want to use it for. The headers on my NF7-S definitley work because I tried them on the back panel that came with my mobo. At first I thought it was something about my front...
  19. C

    Alcohol-based anti-static wipes on LCD screen?

    Is this safe or will the alcohol react with the screen? Just want to be on the safe side. Thanks, cmai
  20. C

    My Barton sucks or I don't know what I'm doing!

    I'm trying to overclock my barton but even if I bump up the FSB 5mhz and leave everything the same, prime95 can't get past the 5th test or so. I've tried doing quite a few combinations like lowering my multiplier to 10 and upping my FSB to 200 at default voltage but that gave me a system halt...
  21. C

    What does this error mean in Prime95?

    I'm trying to overclock my Barton2500 but I keep getting this error when I try to do a torture test. "FATAL ERROR: Rounding was .5 expected is lower than .4" I barely overclock it and I'm getting this. Very disheartening. Thanks, cmai
  22. C

    Front USB ports read my key drive as "unknown"

    I've tried plugging in my USB connectors the headers on my NF7-S but I can't get my key drive to detect. The key drive detects fine on the rear USB ports. Does anyone know what might be wrong? Thanks, cmai
  23. C

    My nforce control panel says I have rev1.0 for NF7-S?

    I bought my board from exacaliberpc on the guarantee that they would send me a 2.0 board. How come the the control panel tells me that I have revision 1.0? Thanks, cmai
  24. C

    In consistent text on LCD?

    I've been noticing lately that my LCD monitor appears to have inconsistent sharpness of text. Does anyone know what might be the cause for this? For example even in this message that I'm typing there are some words that are simply less sharp than the others. Any suggestions would be...
  25. C

    Best black and white printer?

    It seems most printers are all photo printers. In school, I need to print lots of lecture notes online, resumes, and other misc. I was wondering what printer can I get the most out of for printing regular black and white prints? Any inkjets out there? Or is it all about the laser? Thanks, cmai
  26. C

    Can't delete file b/c "file is being used"?

    I can't delete some video files. XP tells me that another program is using it. Is there any way to get around this? I'm not aware of what program could be using this file. cmai
  27. C

    2500+ Barton vs. P4 2.4c - Worth the price difference?

    I'm a college student on a budget. The Barton is enticing because of the price and it's raving reviews. But I've been told the higher end P4s with the 800fsb and HT technology perform better. Do you all think the price difference of about $70 is justifiable to get the 2.4c? Thanks for your...
  28. C

    Can I use a "P4 Ready" psu on an Abit NF7-S?

    The PSU that came with my case only says it is P4 Ready. What does this exactly mean? I kind of want to avoid buying another PSU if I can. Thanks, cmai
  29. C

    Abit NF7-S and PSU Compatibility question

    My case came with a Turbolink (Channelwell) 350W PSU that is "P4 Ready" However, I'll be installing my first AMD system into it. It seems that the PSU has an extra connector, I'm assuming is for P4 mobos. Will this PSU work with the NF7-S or do I need to buy another PSU? Thanks, cmai
  30. C

    What's the trend on hardware performance for present day applications?

    I'm thinking about purchasing a Barton 2500+/Abit NF7-S combo. My P4 1.5ghz (2 years old) just isn't cutting it for games anymore. Would my purchase now leave me choking dust in another 2 years or even less? Then again, I'm a person who never buys the best but gets the best bang for the buck...
  31. C

    What causes dead pixels in LCD monitors?

    I just bought the Hyundai L70S and to my dissapointment it had 2 dead sub-pixels. What causes dead pixels? Can they be repaired? How to avoid future ones? Thanks, cmai
  32. C

    What paint to buy to spray my optical/floppy drives?

    I just bought a black case and thought I may as well spray the drives black as well. What paint is best for this kind of job and also how do I paint the face without possible leaking the paint into the drive itself? Thanks, cmai
  33. C

    All NF7-S from Newegg V2.0?

    The reason I ask is because newegg dropped their price to $115 shipped. I'd rather buy from newegg but excaliberpc guarantees it at least. Thanks, cmai
  34. C

    If my PSU is not "AMD ready" is it still ok to use with an AMD system?

    I'm about to buy the X-Sonic case that comes with a 350W Turbolink PSU. It only says it's "P4 ready" Would this be able to run an AMD system I'm building? Thanks, cmai Model: Turbolink CWT-350ATX-12V
  35. C

    Can someone explain Ram timings to me?

    Would appreciate it or a link would be great. Thanks, cmai
  36. C

    What does this warning msg mean? HELP PLEASE!

    "Warning: disk boot sector is to be modified, press Y to accept, and any key to abort. " This occurred when I was installing windows XP! Please help.
  37. C

    Difference between Router, Hub, Switch?

    Could someone please differentiate these for me? I'm quite confused. I use a hub in my dorm room to share a line with my roommate. I use a linksys router at home to share cable internet. My work uses a switch to network its computers and share internet. Seems like all of these do the same...
  38. C

    Soldering tools?

    I just bought some fans with unconnected wires. Where can I purchase a soldering tool that will get the job done for a reasonable price? I apologize if this is in the wrong forum. Thanks, cmai
  39. C

    Abit NF7-S, can it be updated to rev2.0 if i have a different revision?

    Is this as easy as flashing the bios or is it a hardware difference? Thanks, cmai
  40. C

    Refurbished Mobos - worth the risk?

    I'm thinking of purchasing a mobo that is half-price because it is refurbished. In you experiences, is it worth the risk? Also, some manufacturers offer RMA services. The mobo I'm thinking about buying is an Abit mobo, any experience with their RMA service? thanks, cmai