I ordered my MS-1029 with no operating system. I currently have a home built pc that I built. I used an OEM window XP disk I ordered back when I built the PC. I just want to know if I could uninstall it off my current computer and install it on my MS-1029 notebook. I called microsoft and the...
I just want to know if there is any difference between the 2? I know that the MSI one is a little cheaper and comes with a DVD-RW built in. Can the Z71V use a mini pci wireless card? I know that the MSI one can. I would reather get the ASUS because I like the name better but would the MSI one be...
ok I've been looking at the ASUS Z71V. Would this play any game I want? I currently have a desktop with an AMD 3000+ and a 6600GT video card. How does the 6600 GO stack up to the GT? I need to get a notebook for work but would like it to play games as well. I am going to sell my pc and just use...
What about a Sony VGN-S460B? It has a Nvidia 6200 Go(NVIDIA GeForce Go 6200 graphics with TurboCache technology and 128MB total video memory (32MB discrete, 96MB shared); VGA-out with Smart Display sensor)
Here is the link...
I just want to know if the Compaq V2312US can play Halo? Here is the link to see the specs:
http://www.circuitcity.com/rpsm/oid/127...ccd/productDetailSpecification.do#tabs
or the V2321US:
http://www.bestbuy.com/site/olspage.jsp...ctCategoryId=cat01174&id=1122652696073
I think I might...
I got the ASUS A8N-SLI mobo, and the ASUS 6600GT graphics card. My PSU is a maddog 500w.
The lines are not to noticeable but you can see the if you look close. When certain colors are on the screen you can see more. Could this be from my cheap PSU? I use to have a MSI 6600GT and it was doing...
I have the A8N-SLI mobo and updated my bios to the 1004-01 Beta. There are many new options to set. I have this option PCI Clock Synchronization Mode and I dont know what to set it to. There are 3 options:
-Auto
-To CPU
-33.33 mhz
I currently have it set to 33.33 mhz.
I am...
Can anyone help? I found another post about this same thing but no reply. I need help ASAP. This is stupid if I can overclock!!!
And is 2.5-4-3-7 good for my ram?
Ok here are my settings:
CPU Freq: 250 mhz
PCI Express Clock: 100 mhz
DDR Volts: 2.9v
CPU Mulitplier: x9
CPU Voltage: 1.525v
HTT: x3
Ram Divider: DDR333 (5:6)
Timing: 1T
Ram Timing: 2.5-4-3-7
I have the 3000+ winchester and a A8N-SLI mobo. My ram is 2 256mb chips that came out of a...
I set the Volts to 1.673. I've overclocked my 3000+ winchester to 2250mhz. Where should I set the volts to?
I ran Prime95 for 5 hours with no errors.
What should the volts be?
when I restart I'm getting the message "system failed do to overclocking" and have to press delete and to enter bios and just save and exit or just exit and it always comes when I startup. I also get the RAID configuration on startup. Do you know how to get rid of these? Please help!
when I restart I still get the message "system failed do to overclocking" and have to press delete and to enter bios and just save and exit or just exit and it always comes when I startup. I also get the RAID configuration on startup. Do you know how to get rid of that?
I just got a AMD 3000+ winchester and using the stock heat sink and fan. I have some thermal compound that I got on ebay about a year ago. I dont know the brand, but it says:
Thermal Conductivity:>7.5W/m-k
Thermal Resistance:<0.06 deg. C-in 2/W
10% Silver
Should I use some in my system...
I got it to work. Its been running for 2 1/2 hours and still running. How long should I let it run? and my CPU Temp under load(running prime95) is at 52 C. is this ok? I'm only using stock cooling. Here is what I finally overclocked to:
HTT 3x
HTT 250 mhz
CPU Volts 1.6375
Ram Divider...
I'm currently using 2- 256mb chips, but I have a 512mb chip. All the Ram is PC3200. Can I use the 3rd chip in this board. and if so what slot should I put it in. I currently using DIMM_A1 and DIMM_B1.
I dont understand this crap. I tried a new setup:
HT to 3x
HTT to 250mhz
DRAM to DDR333
memory timing to T1
all other memory stuff to "AUTO"
My system ran fine and I ran Prime95 for an hour, but when I restarted today I got a message "system failed do to overclocking" What am I doing...
I'm in the process of overclocking my system. I had it up to 2200mhz, but now when I started it failed at startup and I had to lower it to 2100mhz. I?m only using stock cooling on everything. What should I set my RAM timing at? can I leave it at AUTO on all the settings? and where do I set the...
I figured it out. My mobo has a card selector to go between single video and sli. It says in the manual it comes stock set to single so I thought it was ok, but it was set to dual video so I had to set it to single and clear my cmos.
I'm also having the same problem. It says in my nvidia settings its PIC BUS x8. I dont know if it's really at x8 or what, but my girl's computer hers says x16? but when i right click the desk top and go to the properties in my MSI tab the check mark is on "PCIE 16X". I have the asus A8N-SLI mobo...
I'm also having the same problem. It says in my nvidia settings its PIC BUS x8. I dont know if it's really at x8 or what, but my girl's computer hers says x16? but when i right click the desk top and go to the properties in my MSI tab the check mark is on "PCIE 16X". I have the asus A8N-SLI mobo...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.