im putting 4 gig of this on two of these boards tomorrow, ill let ya know how they pan out http://www.newegg.com/Product/Product.asp?Item=N82E16820145034
Hi all, I'm sitting here looking at my CM Stacker 830 completly baffled as to how I would mount 2 or 3 fans to the front of the case. The manual does not mention this at all and I see a picture at Cooler Masters site of this case with Fans inside the door (120mm) and another picture showing 3...
Quick update. I have been helping Everest nail down the sensors on this board and the Nforce 4 x16 chipset and we should see an Nforce 4 x16 compatability soon in the Everst product lines. Now on to Sandra lol :-)
I have two ASUS A8N32 SLI Deluxe boards and they are awesome and stable to say the least. I'm very impressed with these boards. A lot of peeps complain about the layout of the pci slots but i only use an Audigy 2 ZS in the middle slot between 2 1 slot EVGA 7800gtx KO ACS3 cards. Thats on one...
Koudelka, the official manual for this board states the following. "Dual-Channel meory architecture : 4 x 184-pin DIMM sockets support unbufferred ECC/non-ECC DDR400/333/266 memory modules. Supports up to 4 GB system memory."
So as long as its unbufferred I imagine it will work fine. I would...
ya never know Dragon, I been itchin to try one :-) I was thinking I need something for the A8N SLI Deluxes I just replaced. Could put those in my servers I would think.
FYI the 800 watt PC Power and Cooling Power supply works fine with this board. Although it does not have adjustable POTS like the 510 Deluxe SLI it makes up for it in cable lengths and raw power. :-) There is about 5 inches sticking out of the back of My case but Lexan happened to be the right...
Skott It fits, I stuck the next EVGA 7800GTX KO AC3 in the second PCIX slot and the closest part of the Audigy 2 ZS to the back of the Video card heat sink is a good 1/4 inch away. Thats the IDE controller on the sound card that commes closest. I dont mind telling you guys after fighting with...
Dragon both processors in both machines are Athlon FX 55's not dual cores. Using Bios and Asus Probe 2 to confirm settings, Everest needs an upgrade to be compatable with this chipset
Zanta -- this is nott the ll3500 ram designed for the board, Its just regular old CORSAIR XMS 2GB (2 x 1GB) 184-Pin DDR SDRAM Unbuffered DDR 400 CL2 (PC 3200) System Memory with LED- Retail
Model #: TWINX2048-3200C2PRO
Item #: N82E16820145587
LOL
Lol, both my boards came up fine and running well and very stable. the only thing i have seen wrong so far is the first time ya access the APM settings in bios they are there, but anytime after that they poof. It does not appear to be affecting the function of the board. I configured each...
Woot ZALMAN CNPS9500 fits---> Im on my way. The 7800 GTX's are the single slot KO editions with AC3 cooler from EVGA. I also have 2 Asus double slot 6800 Ultras and 2 Double slot EVGA 6800 Ultras. If your using a double slot card in all honesty even though the Audigy 2 ZS fits in the middle slot...
In the meantime I did answer the PCI slot question. With both single slot and dual slot (Honkin Cooler) video cards the only pci slot useable is the middle of the 3. I run Audigy ZS 2's so Im glad one is available. It may be possible to use the upper or lower with a half hieght card combined...
woot they are here, i will try and post by tommorrow night with any issues. 1 system will be with 2 7800 gtx's the other with 2 6800 Ultras. Should be intersting
The way I found it in stock at MWAVE was not at Mwave. I googled A8N32 and the links come up with the usual pc xgear , monarch, and east luna. I had been doing this for two weeks waiting for something to change and sure enough yesterday morning mwave showed up. I hit the link and it said in...
lol wuwoze, mine says that too and also says shiped/yes and a tracking number woot. is the moderator putting up a thread for this board so we can detail our experiences and help people??
The directions state to go to the add remove programs applet and choose nvidia drivers and the remove button which gives you a checklist of things to remove. The nforce drivers only require that you uninstall the video drivers and i would turn off sli and reboot before i remove them. This works...
OK, Hi all
Id like to get some feedback on what everyone does when updating video drivers on the A8N SLI Deluxe. Especialy with regard to sli being enabled on the previouse version. This may help set a standard if we can compile everyones thought so im looking for everyones opinions.
If...
Absolutley Love them (2). The boards are just plain fun and awesome with all the features and cool stuff ya can do with them. No issues aside from the early 1002 bios not seeing changes but once 1003 came out im in heaven.
I have a PC Power and Cooling Turbo 510 Deluxe SLI Power supply and 2 Ultras running with dedicated line to each from PS and left the 12 volt plugged in as well on the board and all is fine. I seem to remember reading somewhere arround page 50 of this thread that the 12 volt is realy for the...
I have two machines with two ultras in each running in sli no issues. Go to nvidia and click on beta on the drivers page and load the 6.7.66 drivers which enable sli in 6800 ultras. Also I do a search on author squonk to find my post about switching to ultras for 6600 gt's for order i had to...
Its one or the other guys, Think about it, 1 app is designed overclock and one is designed to down rev or up rev under load. Disable cool n quiet in bios and error for ai booster goes away. Also in registry disable the run command under hkey local machine \ microsoft \ windows \ current controll...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.