in my rig I had the same problem (could run prime, superpi for some time without errors but it freezed sometimes) the solution was to raise LTD voltage, I dunno if it help you but worth a shot.
Ok a little update. Now the temp is below 60C at all times and I'm finishing testing 2.9Ghz at stock vcore (only orthos left for testing but so far everything rock stable). This CPU was the best $179 I ever spend and will hold me nicely before changing the s939. Sandra is reporting higher...
I also got the CCBBE stepping:) do you mind telling what temps you got and what cooling?
I can sense AS5 is burning in because the load temp dropped since yesterday from 65-66 to 60-61.
I didn't waste any time and plugged it in my ultra-d mobo. This time I followed AS instructions and applied some AS5 only on the center instead of sreading it all over the cpu. The good news is that I just started playing with it and right now I'm 4hours orthos stable at 2.85Ghz with default...
are you serious? people are pushing those cpus to 2.8Ghz on stock coolers so why should XP90 have problems?
What do you mean by relap the IHS? please explain or post link t tutorial or something.
Thanks for reply. Glad to hear it because I bought Opty 175 oem from newegg. My mobo has hard time passing 280 ltd so I wanted high multi and opty 175 has 11 which is more than enough. Crossing fingers to hit at least 2.7Ghz.
I have at the moment Thermalright XP-90 with panflo 92mm fan. I'm getting opty dual core and wondering if the cooling that comes with it is better than this thermalright? I heard it's pretty good with heatpipes and all. If there are any tests comparing those two please post a link.
Thanks
newegg is selling mce normally and I don't think it is exclusively for oem. Just to point, I did uninstalled nforce 6.70 and installed 6.66 - so far so good but it was running only few hours
thanks for trying to help but the code provided is just an example from microsoft and has nothing to do with my problem. Microsoft report had no idea what is my problem, the only helpful thing it said was that it was caused by driver. For now I uninstalled 6.70 nforce and installed 6.66 from DFI...
Hi
I didn't visited this site for over a year because everything was running smooth and I was busy enjoying my system:)
yesterday I decided to update the bios and install new windows MCE (before I had XP).
I updated bios no problem, then set all my settings just like before (very stable...
Hi
I didn't visited this site for over a year because everything was running smooth and I was busy enjoying my system:)
yesterday I decided to update the bios and install new windows MCE (before I had XP).
I updated bios no problem, then set all my settings just like before (very stable...
I don't have any issues. Game is loading fast, no pauses, mouse always moving. I don't use virtual ram file on HD so maybe that will help you guys out? Good luck and BTW I like Oblivion on PC more than on XBOX360 because on xbox it gets really choppy in the cities where a lot of people is on screen.
So I found out that my CPU is not the best one for running ram at 1:1 so I decided to sell my 4800plat on ebay and buy 2 gigs or ram and ran it with 166 divider.
This would be 2GB dual channel kit of OCZ 3200plat 2-3-2-5
I'm running right know my cpu at 9X278 so using divider it would get my...
I have 3 pictures
http://img228.echo.cx/img228/8127/19ao.jpg
http://img228.echo.cx/img228/2809/20op1.jpg
http://img228.echo.cx/img228/1376/31fo.jpg
I know those pictures are not the best quality but I don't have ay better ones.
I bought this card from ebay. The auction was titled...
So I got that memory yesterday, I was playing with it for a while now and I would like to hear some feedback/help/suggestions how can I push it further.
my cpu is doing 2500mhz with vcore 1.36 so cpu is definately not the problem.
first I checked if it can run 2-2-2-10 at 400mhz and...
sorry but why are you talking about DDR2???? mine Eb sticks are DDR1
3-3-2-10 are the lowest stable latewncies I can get but this is the magic of EB memory, not always the thightest means fastest.
don't get me wrong, I'm extremely happy with these scores but sandra shows me that maximum bandwidth that I can get at these speeds is 7512MB/s while I'm getting 87-88% of it.
I can't get my memory at higher speeds because I don't have ddr booster or Vdimm mod on mobo, so basically I'm stuck at...
I got really good CPU (3000 winchester oc to 2500mhz at 1.35Vcore and it's prime95 , Super PI stable)
I have 3700Eb and I'm not quite happy with sandra scores. Can you reccomend me different bios or change timings???
here are some photos
http://img110.exs.cx/img110/5492/snap59kr.jpg...
allright so I will correct you
ati at the moment have 2 version of X800 cards
X800pro 12pipelines
X800XT platinum 16 piplines
It dosen't look like Ati want to made new chipset until june 2005 (not official info)
I don't think new games will need such monster graphics
Anyway, Nvidia have...
X800GT??? you mean X800XT platinium edition probably
X800XT have 16 pipelines but it's hell expensive and better way is to buy X800pro and wait for softmod X800pro@xt same story like 9800SE@pro
Not always, we should remember that Ati is not best in making drivers especcialy for new chips like X800 series so first we should wait some time until new drivers will be relased. Ati cards are not that power hungry like Nvidia 6800serie, and all ati cards are one slot whick is also a plus.
in...
what a hell is your problem????
I found a good price and I wanted to share with you but it looks like it was a mistake
Godbadgrs I guess you don't have to many friends..................
whatever
Here is the link
http://shop4.outpost.com/product/4042522
Best price on the NET!!!!! I did a long research and this looks like the best deal (only if you don't like Nvidia)
Hope you happy
Sincerely DeathEvil
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.