I am in the process of RMAing my faulty kingston hyper-x ram (won't run 100% stable even at default settings), and I am noticing my 2400+ won't do 2.5 ghrz stable anymore :(
I've been trying to burn in this processor for about a day now and nothing is working.
Could it be that the...
Makes sure it isn't Kingston, I am having the worst experiance with them ever.
What I need it to do is atleast go up to 210fsb and low latencies.
Thanks
I did the mod to give my ram more voltages, but nothing changed in my bios. How do I give my ram more voltages?
I am pretty sure I did this correctly since nothing has blown up and I double checked to make sure I soldered a wire to the correct pins.
Can someone lead me to this. I want to put 3.1 volts into my kingston hyper-x pc3200 so the damn things will go to 220 fsb stable.
Also, what is considered *too much* in the world of RAM voltaging. I have heatspreaders on my Hyper-X and even at 2.9 volts, they just get warm.
Thanks in advance
I currently am running 2 volts into my 2400+ M so I can get 2.55 stable, my question here is, I feel that I can get more mhrz out of this baby with some more volts. Would it be a good idea to do that (I would never go above 2.5 voltages)?
I am running it on a thermaltake volcano 12+ and it...
My kingston hyper-x ram blows chunks (can't go above 205 fsb at 8-3-3-2.5 stable) and I have been forced to settle my overclock for my 2400+M to 2.55 ghrz (204x12.5) becuase of it. My question is, would there be any increase in performance were I to have a higher fsb with a divider so my ram...
I recently bought a thermaltake purepower 420 watt psu and it's been randomely restarting, my computer. I looked in motherboard monitor and apparently my 12v rail idles at 11.73 or 11.80 and itloads to even 11.6X. My initial thought was because I had 1.95 volts pumped into my cpu and 2.7 volts...
My system seems to be not stable. It's weird. I keep on getting memory cannot be read errors in Half Life 2 and CSS (either that or it will exit itself out) and in Call of Duty, it will crash to desktop.
I have my 2400+m at 228x11 @ 1.95 volts, it's completely stable according to prime95...
I want to get my 2400+ perfectly stable at 2.5 ghrz and I believe I can reach that at 2.00volts. I have a thermaltake volcano 12 extreme so cooling is not a problem at all :P IN fact, I never go above 116*F
So is 2.00 volts fine for my cpu? Will it not explode?
It seems that I can't raise my FSB past 220 when I am seeing people with the exact same processor boasting speeds like 280x9 (don't remember specifics but bear with me).
Everytime I raise my fsb above 220, my bios alarm goes off. And I read this entire article about this guy who got his...
Ok, I am trying to get my voltages on my 2400+m up to 1.9 volts so I can get it stable 220x11 (I am taking advice from another person who easily accomplished that) and if I get it up to 1.9 volts at any speed, while running p95, after about 5 minutes, the computer turns off and the siren alarms...
http://www.a2golf.org/images/comp/overclock.JPG
Abit NF7-S
2400+m
Kingston Hyper-X pc2700
6800 GT
I can't seem to get it up to 200 mhrz and have it stable, and I am confused. I don't think it is my ram because at 200 mhrz fsb, my RAM is at 333 mhrz and 5-2-2-2 (which is what it's...
I currently have my CPU at 177x13 (2.31 ghrz) and I want to get it up to 200 mhrz but anything else just seems unstable. I am pretty sure my ram is hlding me back because it is PC2700.
I have Kingston Hyper-X pc2700 at 6-3-3-3 (it's actually marketed at 5-2-2-2, should I change it to that?) ...
Athlon 2400+ (oc'ed to 2.2 ghrz, 145x15)
1024mb Kingston Hyper-X series pc 2700
eVGA 6800gt
Abit NF7-S
I want upgrade my processor because it is really killing my 6800 gt in games ( Doom 3 goes down to 20 fps with 2 enemies on screen and when I use the flashlight, there is a 10-20 fps...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.