What really sucks is The warranty is certainly voided by the fact that I installed the Tunique (had to cut off a back plate heatsink to make it fit. ^^
I don't know what is wrong with the settings I used, since it was stable @ 3.15 in orthos, and FAR below my best OC of 3.55ghz.
I had it...
When I turn my pc off for the night in the morning I would not be able to boot. The power turned on, no beep would occur, fans spun up. Then about 10 seconds later, the power turns off. Shortly this process repeats as it turns itself on.
When I used the bios reset jumper this was fixed. I was...
Jrock you rock!
LAN IP!!! I hadn't tried that since I messed with the confiuration of the router the first few times. Now it seems to be working, I have to test off site myself to verify.
Universities generally won't care that you steal, however they do care when 85% or more of the network traffic is P2P. Keep in mind the school provides the internet service, and they may restrict it however they see fit.
I am trying to set up WEB BASED remote desktop for winxp.
I followed the instructions here and everything works when I am on the LAN.
http://www.microsoft.com/windowsxp/using/networking/expert/northrup_03may16.mspx
I am behind a linksys WRT54G router with expanded functionality in the...
Newegg does not have the motherboard in stock!!!!
ewiz.com has a 9.3 rating, i NEVER thought i would go outside of newegg. but apparently I will have to. Same price as newegg approximately. Except they have all the parts I need.
Updated the part list with ECC ram. Thanks to a caring...
I am about to buy the parts, want a few opinions first. I am running a RAID5 array on this, and after the upgrade there will be 10hdd's in the server. The power supply is highly rated, and has a 5 year warrantee. I decided not to be cheap and very unhappy =P
$189 Corsair XMS (Twin Pack)...
I want to upgrade my Dual p3 650 to a p4. Since i am spending the money to make the server run better, I dont want to let it run in a 33mhz slot.
I dont want to buy a dual xeon board or something outrageous I only care that it is stable and faster than my current sloth. I want to spend less...
Up until now, i have always worked under the assumption that only people who knew what a computer is would be using my machines. Now i have to comfigure a windows account to allow a few "high risk" users on.
I have seen windows machinese in offices , labs, and libraries that have very...
I don't base purchasing decisions on any single game or engine. So the HL2 benchmarks won't affect me as they seem to be an abberation amongst many tests. Overall the 6800 does seem like better bang for the buck. If I can unlock pipelines that would make me even happier.
I can swing the $250...
Is the BFG 6800OC a regular 6800? its cheaper than the others. And more importantly lifetime warrantee. If its the same as a plain ole 6800 that looks like the best bang for my buck.
I want games like: DeusEx2, Doom3, HL2, VampireTMR, Farcry etc. to run nicely at high detail at ~1280. I basically want the games to look like they were meant to look and still be smooth. I can barely play these games at 1024 on my 9500Pro, with no AA.
Since people seem to say that waiting for the x800 isnt the best of ideas, I have my eye on the following:
XFX 6600GT I heard some of the other top brands dont have very secure HSF mounts, and this one has dual dvi out =)
Someone did advise as follows:
"Personaly, I would save up and get...
Ah lots of responses. Everyone at HardOCP's forums seems to say go with the 6600 also. I was leaning towards that because im not cheap ^^
"why not get your bro a ti4200?"
If i spent 50$ on a vid card for him, i could just spend $250 for me instead. I am not saving up, I just dont think its...
NEEDS:
I am running an A64 3200+
ATI vs Nvidia: I dont care*
I would like a card that would make all the new games look the way they are intended to look. I can't tell what my 9500pro cant do in DX9 so please chime in if you can give some info.
MY IDEAS:
I see that the following two cards...
I have the following configuration nothing overclocked:
Asus K8V
2x512 Corsair ram
primary master 40g ide
promise raid controller 2xWD120JB connected with Highpoint Rockethead ATA->SATA adapters
When i create the array it is fine, however after a few shut downs, or a power interuption the RAID1...
I recieved the router less than 24 hours after i placed the order! I was thrilled... until i plugged it in.
This router seems to have major problems, i have to reset it CONSTANTLY or it stops responding completely. It worked for about 6 hours when i first plugged it in, then it lasted shorter...
I would like to devote a good block of computing power to some distributed computing cause, however, I am only familiar with SETI, Folding, and the ones from Distributed.net. I would appreciatre a quick rundown of the distributed computing projects that theoretically will benefit someone in the...
What is wrong with ATI video + Nforce boards? I just got an ASUS K8V that I am going to return due to instability issues(random reboots/Memory timing problems), I am not sure what to replace it with.
I just care about performance and stability and I am not sure if my problems would occur on...
Ungor: What model is your kingston ram and what are the timings?
I might just replace the ram [possibly the motherboard if that doesnt work] and see what happens, it looks promising as far as the delay, but i still got a random reboot which is not acceptable.
Corsair PC3200 2-3-3 twinpack...
I just installed windowsXP pro on the following setup:
AMD A64 3200
ASUS K8V
(2)512 3-4-4 pc4000 mushkin
RADEON 9500 pro
Hercules GTXP
ANTEC 400Watt PSU
Western digital 13gig 5400rpm (my 80 gig is being RMA'd)
I have a few occasional problems along with some extra info to help give an idea of...
Now I have another issue:
When i try to open the winrar GUI, it takes over a minute. If i just use the command to "extract here" it will work right away.
When i open winamp, it takes 2 minutes before the gui finishes loading and the music starts.
In either case ther CPU utilization is 0%...
The 13 gig hardrive is in UDMA4 mode, and I seriously doubt that the speed of the drive has anything to do with the pauses.
I always try updating my drivers although I did not update my via 4in1's after the one that came with the board. I will do that and double check ASUS's website.
BTW Thats...
I am running windows XP pro, and have two occasional problems along with some extra info to help give an idea of what is going on
1. When I run a new application for the 1st time, or i switch between running apps, the system hangs for a second or two. I checked the taskmanager to see if...
I finally found this after over a week and a half of troubleshooting and reinstalling:
http://forums.viaarena.com/messageview.cfm?catid=20&threadid=42499&FTVAR_MSGDBTABLE=
I now wish to replace the motherboard, can someone suggest a springdale based motherboard that has onboard IDE RAID that...
Verifier had no problems.
I ran memtest86 and I never get an "error" but the test locks up on the 2nd pass 3rd test 0% test progress. This is true using 1 stick in any slot, or both sticks in any configuration. This memtest problem is the only hardware anomoly that i could find by testing. It...
Heh i dont know what i did, but now it no longer says linear mode. And CPU-Z shows dual channel.
Now how should i try to tweak the timings? I am not sure if i can just lower each, one at a time till it no longer works properly and then go to the next, or specific combinations matter.
Windows Could Not Start Because the Following File Is Missing or Corrupt: \Winnt\System32\Config\System.ced
I am thoroughly aware that the ced is an unerased part of the previous message.
The problem is described here: http://support.microsoft.com/default.aspx?scid=KB;EN-US;q269075&
The two...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.